The printer supports paper weights of 56–90 g/m2 (15–24 lb) and envelope weights of 75–90 g/m2 (20–24 lb).
Paper types | Single | Multiple part | Envelopes |
|---|---|---|---|
* When the optional Auto Sheet Feeder or the Tractor 2 Feeder is installed, the cut form maximum width is 215 mm (8.5 in.) for manual loading. | |||
Cut Forms | 76 mm (3.0 in.) to 297 mm (11.7 in.)* | 76 mm (3.0 in.) to 297 mm (11.7 in.)* | 152 mm (6.0 in.) to 241 mm (9.5 in.) |
Continuous Forms | 76 mm (3.0 in.) to 254 mm (10.0 in.) | 76 mm (3.0 in.) to 254 mm (10.0 in.) | Not applicable |
Hole-to-hole widths | 63 mm (2.5 in.) to 241 mm (9.5 in.) | 63 mm (2.5 in.) to 241 mm (9.5 in.) | Not applicable |
Paper types | Single | Multiple part | Envelopes |
|---|---|---|---|
Cut Forms | 76 mm (3.0 in.) to 559 mm (22.0 in.) | 76 mm (3.0 in.) to 559 mm (22.0 in.) | 110 mm (4.1 in.) to 152 mm (6.0 in.) |
Continuous Forms | 76 mm (3.0 in.) (no maximum) | 76 mm (3.0 in.) (no maximum) | Not applicable |
Paper types | Single | Multiple part | Envelopes |
|---|---|---|---|
Note: For 2580+/2581+ printers, the maximum thickness of multiple part forms is 0.512 mm (0.0202 in.). For 2590+/2591+ printers, the maximum thickness is 0.36 mm (0.015 in.). | |||
Cut Forms | 0.058 mm (0.0023 in.) to 0.114 mm (0.0045 in.) | See the following note. | 0.42 mm (0.017 in.) |
Continuous Forms | 0.058 mm (0.0023 in.) to 0.114 mm (0.0045 in.) | See the following note. | 0.42 mm (0.017 in.) |