The printer supports paper weights of 56–90 g/m2 (15–24 lb) and envelope weights of 75–90 g/m2 (20–24 lb).
Width
Paper types
Single
Multiple part
Envelopes
* When the optional Auto Sheet Feeder or the Tractor 2 Feeder is installed, the cut form maximum width is 215 mm (8.5 in.) for manual loading.
Cut Forms
76 mm (3.0 in.) to 297 mm (11.7 in.)*
76 mm (3.0 in.) to 297 mm (11.7 in.)*
152 mm (6.0 in.) to 241 mm (9.5 in.)
Continuous Forms
76 mm (3.0 in.) to 254 mm (10.0 in.)
76 mm (3.0 in.) to 254 mm (10.0 in.)
Not applicable
Hole-to-hole widths
63 mm (2.5 in.) to 241 mm (9.5 in.)
63 mm (2.5 in.) to 241 mm (9.5 in.)
Not applicable
Length
Paper types
Single
Multiple part
Envelopes
Cut Forms
76 mm (3.0 in.) to 559 mm (22.0 in.)
76 mm (3.0 in.) to 559 mm (22.0 in.)
110 mm (4.1 in.) to 152 mm (6.0 in.)
Continuous Forms
76 mm (3.0 in.) (no maximum)
76 mm (3.0 in.) (no maximum)
Not applicable
Thickness
Paper types
Single
Multiple part
Envelopes
Note: For 2580+/2581+ printers, the maximum thickness of multiple part forms is 0.512 mm (0.0202 in.). For 2590+/2591+ printers, the maximum thickness is 0.36 mm (0.015 in.).