When a new network Lexmark Internal Solutions Port (ISP) is installed in the printer, the printer configurations on computers that access the printer must be updated because the printer will be assigned a new IP address. All computers that access the printer must be updated with this new IP address in order to print to it over the network.
Notes:
Print a network setup page and make a note of the new IP address.
Do one of the following:
Click .
Click Control Panel.
Under Hardware and Sound, click Printer.
Click Start.
Click Printers and Faxes.
Click Start.
Click Settings > Printers.
Locate the printer that has changed.
Note: If there is more than one copy of the printer, then update all of them with the new IP address. |
Right-click the printer.
Click Properties.
Click the Ports tab.
Locate the port in the list, and then select it.
Click Configure Port.
Type the new IP address in the “Printer Name or IP Address” field. You can find the new IP address on the network setup page you printed in step 1.
Click OK, and then click Close.
Print a network setup page and make a note of the new IP address.
Locate the printer IP address in the TCP/IP section of the network setup page. You will need the IP address if you are configuring access for computers on a different subnet than the printer.
Add the printer:
For IP printing:
From the Apple menu, choose System Preferences.
Click Print & Fax.
Click +.
Select the printer from the list.
Click Add.
From the Go menu, choose Applications.
Double-click Utilities.
Double-click Printer Setup Utility or Print Center.
From the Printer List, click Add.
Select the printer from the list.
Click Add.
For AppleTalk printing:
From the Apple menu, choose System Preferences.
Click Print & Fax.
Click +.
Click AppleTalk.
Select the printer from the list.
Click Add.
From the Go menu, choose Applications.
Double-click Utilities.
Double-click Print Center or Printer Setup Utility.
From the Printer List, click Add.
Choose the Default Browser tab.
Click More Printers.
From the first pop-up menu, choose AppleTalk.
From the second pop-up menu, select Local AppleTalk zone.
Select the printer from the list.
Click Add.