Scanning to a computer

  1. Type the printer IP address into the address field of your Web browser.

    Note: If you do not know the IP address of the printer, then print a network setup page and locate the IP address in the TCP/IP section.

  2. Click Scan Profile.

  3. Click Create.

  4. Select your scan settings, and then click Next.

  5. Select a location on your computer where you want to save the scanned output file.

  6. Enter a scan name.

    The scan name is the name that appears in the Scan Profile list on the display.

  7. Click Submit.

  8. Review the instructions on the Scan Profile screen.

    A shortcut number was automatically assigned when you clicked Submit. You can use this shortcut number when you are ready to scan your documents.

    1. Load an original document faceup, short edge first into the ADF or facedown on the scanner glass.

      Note: Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine clippings) into the ADF. Place these items on the scanner glass.

    2. If you are loading a document into the ADF, then adjust the paper guides.

    3. Press pouind button, and then enter the shortcut number using the keypad, or touch Held Jobs on the home screen, and then touch Profiles.

    4. After you enter the shortcut number, the scanner scans and sends the document to the directory or program you specified. If you touched Profiles on the home screen, then locate your shortcut on the list.

  9. Return to the computer to view the file.

    The output file is saved in the location you specified or launched in the program you specified.