Printer Update Instructions--V1.5G


To update your printer via USB attach:
  

1)	You must be using Microsoft Windows 98SE(TM) or later Operating System to flash code via USB.
2)	Connect the printer to the computer with a USB cable if not already so connected.
3)	Open a MS DOS(TM) command prompt.  Navigate to the directory in which the code files reside 
	and type: "usbutil filename.xyz" and hit enter.  Wait for the printer to finish the 		
	code download;  DO NOT POWER OFF MACHINE WHILE UPDATING CODE.
4)	You will need to repeat the process above for both Rip and Engine updates if both are available; 		
	update Engine Code first and then Rip Code.  Follow the same process above unless otherwise 		
	directed for other separate code package updates(i.e. tray, duplex).  Wait for the first file to 		
	complete resetting the printer to a "Ready" state before repeating the process above for a second 		
	file.  DO NOT POWER OFF MACHINE WHILE UPDATING CODE.


To update your printer via network attach:


1)	Download the latest version of printer code to a directory of your choice.
2)	Open your Web Browser(Internet Explorer(TM)/Netscape Navigator(TM),etc.) and enter the IP address 
	or Hostname of your printer.  	This will connect you to the Network Adapter HTTP page. Select 
	'PRINT'.  Use the 'Browse File System' Button to pick the firmware file.  You will need to repeat 
    	this process above for both Rip and Engine updates if both are available; update Engine Code first
	and then Rip Code.  Follow the same process above unless otherwise directed for other separate code 
	package updates(i.e. tray, duplex).  Wait for the first file to	complete resetting the printer to a "Ready" 
	state before repeating the process above for a second file.  DO NOT POWER OFF MACHINE WHILE UPDATING CODE.
	If this is unsuccessful go to step 3 below to update over network via ftp.
3)	At a printer "READY" state open a MS DOS(TM) command prompt and move to the directory selected 			
	in instruction (1).  
4)	To ftp to the IP address using the MS DOS(TM) command line ftp client: 
	A.	Using an FTP Client connect to the printer. Example "ftp: 111.111.111.11" .
	B.	Type “bin” (puts ftp session in binary mode)
	C.	Type “put c:\filename.xyz” (assumes the file is in your root directory).  
	D.	DO NOT POWER OFF MACHINE WHILE UPDATING CODE.
5)	You will need to repeat the process above for both Rip and Engine updates if both are available; 		
	update Engine Code first and then Rip Code.  Follow the same process above unless otherwise 		
	directed for other separate code package updates(i.e. tray, duplex).  Wait for the first file to 		
	complete resetting the printer to a "Ready" state before repeating the process above for a second 		
	file.  DO NOT POWER OFF MACHINE WHILE UPDATING CODE.



To update your printer via parallel attach:


1)	Download the latest version of printer code to a directory of your choice.
2)	At a printer "READY" state open a MS DOS(TM) command line and move to the directory selected in instruction (1). 
3)	You may copy the file via LPT port (parallel port) with the /b switch 
	Example: “copy filename.xyz lpt1 /b”
	(assumes you are in the same directory as filename.xyz)
4)	DO NOT POWER OFF MACHINE WHILE UPDATING CODE.
5)	You will need to repeat the process above for both Rip and Engine updates if both are available; 		
	update Engine Code first and then Rip Code.  Follow the same process above unless otherwise directed 
	for other separate code package updates(i.e. tray, duplex).  Wait for the first file to complete resetting the 
	printer to a "Ready" state before repeating the process above for a second file.  
	DO NOT POWER OFF MACHINE WHILE UPDATING CODE.


For other Printer Code updates or clarifications, please contact Technical Support for your printer.