Configuring a network destination

1. From the Embedded Web Server, navigate to the configuration page for the application:

   Apps > Scan Center > Configure

   Note:  This application is supported only in some printers.

2. Click Network Folder > Create Network Folder .

3. Select the connection type, and then do either of the following:

   • For SMB, type or browse to the network folder.

   • For FTP or SFTP, type the FTP address and the port number.

     Note:  For SFTP, set the port number to 22 .

4. Configure the settings.

5. Click Save .

Notes:

• To use the home directory attribute in the Folder Address field, type % before and after the attribute. For example, %customAttribute% . You can also use other LDAP attributes such as %cn% , %sAMAccountName% , and %userPrincipalName% .
• To edit a destination, select it from the list.
• To delete a destination, click beside it.
• You can also prevent users from creating or editing destinations using the printer control panel.

Configuring an e-mail destination

1. From the Embedded Web Server, navigate to the configuration page for the application:

   Apps > Scan Center > Configure

   Note:  This application is supported only in some printer models.

2. Click E-mail > Create E-mail .

3. Configure the settings.

4. Click Save .

Notes:

• To edit a destination, select it from the list.
• To delete a destination, click beside it.
• You can also prevent users from creating or editing destinations using the printer control panel.

Configuring a fax destination

1. From the Embedded Web Server, navigate to the configuration page for the application:

   Apps > Scan Center > Configure

   Note:   This application is supported only in some printer models.

2. Click Fax > Create Fax .

3. Configure the settings.

4. Click Save .

Notes:

• To edit a destination, select it from the list.
• To delete a destination, click beside it.
• You can also prevent users from creating or editing destinations using the printer control panel.

Configuring a remote printer destination

Scan documents on a supported printer and then send the scanned documents to another printer on the network.

1. From the Embedded Web Server, navigate to the configuration page for the application:

   Apps > Scan Center > Configure

   Note:  This application is supported only in some printer models.

2. Click Remote Printer > Create Remote Printer .

3. Configure the settings.

4. Click Save .

Notes:

• To edit a destination, select it from the list.
• To delete a destination, click beside it.
• You can also prevent users from creating or editing destinations using the printer control panel.