Selecting the active network adapter

1. From the Embedded Web Server, click Settings > Network/Ports > Network Overview > Active Adapter .

2. Select the network adapter.

   • Auto —Switch automatically to an available network connection.

     Note:  Ethernet connection takes precedence over wireless connection. Remove the Ethernet cable to allow the printer to detect the configured wireless network.

   • Standard Network —Disable the wireless network connection and set the printer to connect only through Ethernet connection.

   • Wireless —Disable the Ethernet network connection and set the printer to connect only through wireless connection.

     Note:  This setting appears only when a wireless network adapter is installed in the printer.

3. Click Save .