Paper jam in door A

1. Remove the tray.

   

2. Open door A.

   

3. Remove the toner cartridge.

   

4. Remove the imaging unit.

   
   Warning—Potential Damage:  Do not expose the imaging unit to direct light for more than 10 minutes. Extended exposure to light may cause print quality problems.
   Warning—Potential Damage:  Do not touch the photoconductor drum. Doing so may affect the quality of future print jobs.
   

5. Remove the jammed paper.

     CAUTION—HOT SURFACE:  The inside of the printer might be hot. To reduce the risk of injury from a hot component, allow the surface to cool before touching it.
   Note:  Make sure that all paper fragments are removed.
   

6. Insert the imaging unit.

   Note:  Use the arrows inside the printer as guides.
   

7. Insert the toner cartridge.

   Note:  Use the arrows inside the printer as guides.
   

8. Close door A.

9. Insert the tray.