Adjusting color

Wait for the process to complete.

Bin full. Remove paper.

Remove the paper stack from the standard bin.

Cannot collate large document [37]

Try one or more of the following:

• From the printer control panel, press to print the portion of the job already stored and begin collating the rest of the print job.

• Cancel the current print job.

Change [paper source] to [custom string]

Try one or more of the following:

• Load the correct size and type of paper in the tray, and then press on the printer control panel.

  Note:  Make sure the paper size and type are specified in the Paper menu on the printer control panel.

• Cancel the print job.

Change [paper source] to [custom type name]

Try one or more of the following:

• Load the correct size and type of paper in the tray, and then press on the printer control panel.

  Note:  Make sure the paper size and type are specified in the Paper menu on the printer control panel.

• Cancel the print job.

Change [paper source] to [paper type] [paper size]

Try one or more of the following:

• Load the correct size and type of paper in the tray, and then press on the printer control panel.

  Note:  Make sure the paper size and type are specified in the Paper menu on the printer control panel.

• Cancel the print job.

Close door

Make sure the right side cover is installed, and then close the front and top doors to clear the message.

[Color] cartridge low [88.xy]

You may need to order a toner cartridge. If necessary, press on the printer control panel to clear the message and continue printing.

[Color] cartridge nearly low [88.xy]

If necessary, press on the printer control panel to clear the message and continue printing.

[Color] cartridge very low, [x] estimated pages remain [88.xy]

You may need to replace the toner cartridge very soon. For more information, see the “Replacing supplies” section of the User’s Guide .

If necessary, press on the printer control panel to clear the message and continue printing.

Complex page may misprint [39]

Try one or more of the following:

• From the printer control panel, press to clear the message and continue printing.

• Reduce the number and size of fonts, the number and complexity of images, and the number of pages in the print job.

• Cancel the print job.

• Install additional printer memory.

Error reading USB drive. Remove USB.

An unsupported USB device is inserted. Remove the USB device, and then insert a supported one.

Incompatible tray [x] [59]

Remove, and then reinstall the indicated tray to clear the message.

Insert tray [x]

Insert the indicated tray into the printer.

Load [paper source] with [custom string]

Try one or more of the following:

• Load the indicated tray or feeder with the correct size and type of paper.

• From the printer control panel, press to clear the message and continue printing.

  Note:  If the printer finds a tray or feeder that has the correct paper type and size, then it feeds from that tray or feeder. If the printer cannot find a tray or feeder that has the correct size and type of paper, then it prints from the default paper source.

• Cancel the current job.

Load [paper source] with [custom type name]

Try one or more of the following:

• Load the tray or feeder with the correct size and type of paper.

• From the printer control panel, press to clear the message and continue printing.

  Note:  If the printer finds a tray or feeder that has the correct size and type of paper, then it feeds from that tray or feeder. If the printer cannot find a tray or feeder that has the correct size and type of paper, then it prints from the default paper source.

• Cancel the current job.

Load [paper source] with [paper size]

Try one or more of the following:

• Load the tray or feeder with the correct size of paper.

• From the printer control panel, press to clear the message and continue printing.

  Note:  If the printer finds a tray or feeder that has the correct paper size, then it feeds from that tray or feeder. If the printer cannot find a tray or feeder that has the correct size of paper, then it prints from the default paper source.

• Cancel the current job.

Load [paper source] with [paper type] [paper size]

Try one or more of the following:

• Load the tray or feeder with the correct size and type of paper.

• From the printer control panel, press to clear the message and continue printing.

  Note:  If the printer finds a tray or feeder that has the correct size and type of paper, then it feeds from that tray or feeder. If the printer cannot find a tray or feeder that has the correct size and type of paper, then it prints from the default paper source.

• Cancel the current job.

Load Manual Feeder with [custom string]

Try one or more of the following:

• Load the feeder with the correct size and type of paper.

• From the printer control panel, press to clear the message and continue printing.

  Note:  If no paper is loaded in the feeder, then the printer manually overrides the request, and then prints from an automatically selected tray.

• Cancel the current job.

Load Manual Feeder with [custom type name]

Try one or more of the following:

• Load the feeder with the correct size and type of paper.

• From the printer control panel, press to clear the message and continue printing.

  Note:  If no paper is loaded in the feeder, then the printer manually overrides the request, and then prints from an automatically selected tray.

• Cancel the current job.

Load Manual Feeder with [paper size]

Try one or more of the following:

• Load the feeder with the correct size of paper.

• From the printer control panel, press to clear the message and continue printing.

  Note:  If no paper is loaded in the feeder, then the printer manually overrides the request, and then prints from an automatically selected tray.

• Cancel the current job.

Load Manual Feeder with [paper type] [paper size]

Try one or more of the following:

• Load the feeder with the correct size and type of paper.

• From the printer control panel, press to clear the message and continue printing.

  Note:  If no paper is loaded in the feeder, then the printer manually overrides the request, and then prints from an automatically selected tray.

• Cancel the current job.

Maintenance kit low [80.xy]

You may need to order a maintenance kit. For more information, visit the Lexmark support Web site at http://support.lexmark.com or contact customer support, and then report the message.

If necessary, press on the printer control panel to clear the message and continue printing.

Maintenance kit nearly low [80.xy]

For more information, visit the Lexmark support Web site at http://support.lexmark.com or contact customer support, and then report the message.

If necessary, press on the printer control panel to clear the message and continue printing.

Maintenance kit very low [80.xy]

You may need to replace the maintenance kit very soon. For more information, go to http://support.lexmark.com or contact customer support.

If necessary, press on the printer control panel to clear the message and continue printing.

Memory full [38]

Try one or more of the following:

• From the printer control panel, press to clear the message.

• Decrease the resolution setting.

• Install additional printer memory.

Memory low, no Resource Save [35]

Try one or more of the following:

• From the printer control panel, press to disable Resource Save, clear the message, and continue printing.

• Install additional printer memory.

Network error, port [x] [54]

Try one or more of the following:

• From the printer control panel, press to clear the message and continue printing.

• Unplug the router, wait for 30 seconds, and then plug it back again.

• Turn off the printer, wait for about 10 seconds, and then turn the printer back on.

• Update the network firmware in the printer or the print server. For more information, visit the Lexmark Web site at http://support.lexmark.com .

Network error, standard port [54]

Try one or more of the following:

• From the printer control panel, press to clear the message and continue printing.

• Unplug the router, wait for 30 seconds, and then plug it back again.

• Turn off the printer, wait for about 10 seconds, and then turn the printer back on.

• Update the network firmware in the printer or the print server. For more information, visit the Lexmark Web site at http://support.lexmark.com .

Non-Lexmark [supply type], see User's Guide [33.xy]

The printer has detected a non-Lexmark supply or part installed in the printer.

Your Lexmark printer is designed to function best with genuine Lexmark supplies and parts. Use of third-party supplies or parts may affect the performance, reliability, or life of the printer and its imaging components. For more information, see Using genuine Lexmark parts and supplies .

All life indicators are designed to function with Lexmark supplies and parts, and may deliver unpredictable results if third-party supplies or parts are used. Imaging component usage beyond the intended life may damage your Lexmark printer or its associated components.

To accept any and all of these risks, and to proceed with the use of non-genuine supplies or parts in your printer, press and on the control panel simultaneously for 15 seconds to clear the message and continue printing.

If you do not want to accept these risks, then remove the third-party supply or part from your printer and install a genuine Lexmark supply or part.

Paper too short [34]

Try one or more of the following:

• Load the correct size of paper in the tray.

• From the printer control panel, press to clear the message and print using a different tray.

• Check the tray length and width guides and make sure the paper is loaded properly in the tray.

• Make sure the correct paper size and type are specified in Print Properties or in the Print dialog.

• Make sure the paper size and type settings are specified in the Paper menu on the printer control panel.

• Make sure the paper size is correctly set. For example, if the Multipurpose Feeder Size is set to Universal, then make sure the paper is large enough for the data being printed.

• Cancel the print job.

Printer had to restart. Last job may be incomplete.

From the printer control panel, press to clear the message and continue printing.

For more information, go to http://support.lexmark.com or contact customer support.

Rear USB port disabled [56]

Try one or more of the following:

• From the printer control panel, press to clear the message and continue printing.

  Note:  The printer discards any data received through the USB port.

• From the printer control panel, set USB Buffer to Auto.

Reinstall missing or unresponsive [color] cartridge [31.xy]

Try one or more of the following:

• Install the missing toner cartridge. For more information, see the “Replacing supplies” section of the User’s Guide .

• Remove the unresponsive cartridge, and then reinstall it.

  Note:  If the message appears after reinstalling the supply, then the cartridge may be defective. Replace the cartridge.

Reinstall missing or unresponsive black and color imaging kit and all cartridges [31.xy]

Try one or more of the following:

• Check if the imaging kit is missing. If missing, then install the imaging kit.

  For information on installing the imaging kit, see the “Replacing supplies” section.

• If the imaging kit is installed, then remove and reinstall the unresponsive imaging kit.

  Note:  If the message appears after reinstalling the supply, then replace the imaging kit. The imaging kit may be defective or a non-genuine Lexmark supply. For more information, see Using genuine Lexmark parts and supplies .

Reload printed pages in Tray [x]

Try any of the following:

• From the printer control panel, press to clear the message and continue printing the second side of the sheet.

• From the printer control panel, press to cancel the print job.

Remove packaging material, check all

1. Remove any remaining packing material from the specified location.

2. From the printer control panel, press to clear the message and continue printing.

Remove paper from standard output bin

Remove the paper stack from the standard bin.

Replace maintenance kit [80.xy]

The printer is scheduled for maintenance. For more information, go to http://support.lexmark.com or contact your service representative, and then report the message.

Replace missing [color] cartridge [31.xy]

Install the indicated toner cartridge to clear the message. For more information, see the “Replacing supplies” section of the User’s Guide .

Replace missing [type] imaging kit [31.xy]

Install the indicated imaging kit to clear the message. For more information, see the “Replacing supplies” section of the User’s Guide .

Replace missing waste toner bottle [31.xyz]

Install the missing waste toner bottle to clear the message. For more information, see the instruction sheet that came with the supply.

Replace [type] imaging kit, 0 estimated pages remain [84.xy]

Replace the indicated imaging kit to clear the message and continue printing. For more information, see the instruction sheet that came with the supply.

Replace unsupported [color] cartridge [32.xy]

Remove the toner cartridge, and then install a supported one to clear the message.

Replace unsupported [type] imaging kit [32.xy]

Remove the indicated imaging kit, and then install a supported one to clear the message.

Replace waste toner bottle [82.xy]

Replace the waste toner bottle to clear the message.

Supply needed to complete job

A supply needed to complete the job is missing. Cancel the current job.

Too many trays. Remove some. [58]

1. Turn off the printer.

2. Unplug the power cord from the electrical outlet.

3. Remove the extra trays.

4. Connect the power cord to the electrical outlet.

5. Turn the printer back on.

[Type] imaging kit low [84.xy]

You may need to replace the imaging kit. If necessary, press on the printer control panel to clear the message and continue printing.

[Type] imaging kit nearly low [84.xy]

If necessary, press on the printer control panel to clear the message and continue printing.

[Type] imaging kit very low, [x] estimated pages remain [84.xy]

You may need to replace the imaging kit very soon. For more information, see the “Replacing supplies” section of the User’s Guide .

If necessary, press on the printer control panel to clear the message and continue printing.

Waste toner bottle nearly full [82.xy]

You may need to order a waste toner bottle. If necessary, press on the printer control panel to clear the message and continue printing.