Cleaning the printer

  CAUTION—SHOCK HAZARD:  To avoid the risk of electrical shock when cleaning the exterior of the printer, unplug the power cord from the electrical outlet and disconnect all cables from the printer before proceeding.

Notes:

• Perform this task after every few months.
• Damage to the printer caused by improper handling is not covered by the printer warranty.

1. Turn off the printer, and then unplug the power cord from the electrical outlet.

2. Remove paper from the standard bin.

3. Remove any dust, lint, and pieces of paper around the printer using a soft brush or vacuum.

4. Wipe the outside of the printer with a damp, soft, lint-free cloth.

   Notes:

   • Do not use household cleaners or detergents, as they may damage the finish of the printer.
   • Make sure that all areas of the printer are dry after cleaning.

5. Connect the power cord to the electrical outlet, and then turn on the printer.

     CAUTION—POTENTIAL INJURY:  To avoid the risk of fire or electrical shock, connect the power cord to an appropriately rated and properly grounded electrical outlet that is near the product and easily accessible.

Cleaning the touch screen

  CAUTION—SHOCK HAZARD:  To avoid the risk of electric shock when cleaning the exterior of the printer, unplug the power cord from the electrical outlet and disconnect all cables from the printer before proceeding.

1. Turn off the printer, and then unplug the power cord from the electrical outlet.

2. Using a damp, soft, lint-free cloth, wipe the touch screen.

   Notes:

   • Do not use household cleaners or detergents, as they may damage the touch screen.
   • Make sure that the touch screen is dry after cleaning.

3. Connect the power cord to the electrical outlet, and then turn on the printer.

     CAUTION—POTENTIAL INJURY:  To avoid the risk of fire or electrical shock, connect the power cord to an appropriately rated and properly grounded electrical outlet that is near the product and easily accessible.

Cleaning the pick tires

1. Turn off the printer.

2. Unplug the power cord from the electrical outlet, and then from the printer.

3. Open the front door, and then firmly push it down.

   

4. Pull out the print cartridge tray.

   

5. To avoid stray toner contamination, place a sheet of paper on top of the print cartridge tray, and then insert the print cartridge tray.

   

6. Close the front door.

7. Remove the tray.

   

8. Remove the waste toner bottle.

   
   Note:  To avoid spilling the toner, place the bottle in an upright position.

9. Position the printer on its side.

   

10. Remove the pick tires.

    

11. Apply isopropyl alcohol to a soft, lint-free cloth, and then wipe the pick tires.

12. Insert the pick tires.

    

13. Return the printer to its original position, and then insert the waste toner bottle.

14. Insert the tray.

15. Open the front door, and then firmly push it down.

16. Pull out the print cartridge tray.

17. Remove the paper, and then insert the print cartridge tray.

18. Close the front door.

19. Connect the power cord to the printer, and then to the electrical outlet.

      CAUTION—POTENTIAL INJURY:  To avoid the risk of fire or electrical shock, connect the power cord to an appropriately rated and properly grounded electrical outlet that is near the product and easily accessible.

20. Turn on the printer.