Use |
To |
---|---|
Printer Language
|
Set the default printer language. Notes:
|
Job Waiting
|
Determine if print jobs are removed from the print queue when they require unavailable printer options or custom settings. These print jobs are stored in a separate print queue, so other jobs print normally. When the missing information or options are obtained, the stored jobs print. Notes:
|
Print Area
|
Set the logical and physical printable area. Notes:
|
Printer Usage
|
Set color toner use in printing. Note: Max Yield is the factory default setting. |
Black Only Mode
|
Set the printer to print text and graphics using only the black toner cartridge. Notes:
|
Download Target
|
Set the storage location for downloads. Notes:
|
Resource Save
|
Specify how the printer handles temporary downloads, such as fonts and macros stored in the RAM, when the printer receives a job that requires more memory than is available. Notes:
|
Print All Order
|
Specify the order in which held and confidential jobs are printed . Note: Alphabetical is the factory default setting. |
Use |
To |
---|---|
Display Language
|
Set the language of the text that appears on the display. Note: Not all languages are available for all models. You may need to install special hardware for some languages. |
Show Supply Estimates
|
View the supply estimates on the control panel, Embedded Web Server, menu settings, and device statistics reports. Note: Show estimates is the factory default setting. |
Eco-Mode
|
Minimize the use of energy, paper, or specialty media. Notes:
|
Quiet Mode
|
Reduce printer noise. Note: Off is the factory default setting. |
Run Initial Setup
|
Run the setup wizard. |
Keyboard
|
Specify a language and custom key information for the keyboard on the display. |
Paper Sizes
|
Specify the unit of measurement for paper sizes. Notes:
|
Displayed Information
|
Specify the display information on the upper corners of the home screen. Select from the following options:
Notes:
|
Displayed Information (continued)
|
Customize the text to display in the upper corners of the home screen. Note: You can type up to 32 characters. |
Displayed Information (continued)
|
Specify the display information for the supplies. Select from the following options:
|
Displayed Information (continued)
|
Customize the displayed information for certain menus. Select from the following options:
Notes:
|
Home screen customization
|
Change the icons that appear on the home screen. Select from the following options:
|
Date Format
|
Format the printer date. Note: MM-DD-YYYY is the U.S. factory default setting. DD-MM-YYYY is the international factory default setting. |
Time Format
|
Format the time. Note: 12 hour A.M./P.M. is the factory default setting. |
Screen Brightness
|
Specify the brightness of the display. Note: 100 is the factory default setting. |
Audio Feedback
|
Set the button volume and feedback. Notes:
|
Show Bookmarks
|
Specify whether to display bookmarks from the Held Jobs area. Note: Yes is the factory default setting. |
Web Page Refresh Rate
|
Specify the number of seconds between Embedded Web Server refreshes. Note: 120 is the factory default setting. |
Contact Name |
Specify a contact name for the printer. Note: The contact name is stored on the Embedded Web Server. |
Location |
Specify the printer location. Note: The location is stored on the Embedded Web Server. |
Alarms
|
Set an alarm when the printer requires user intervention. For each alarm type, select from the following options:
Note: Single is the factory default setting. |
Timeouts
|
Set the time in minutes before the printer enters a lower power state. Note: 15 is the factory default setting. |
Timeouts
|
Set the idle time before the printer begins operating in Sleep Mode. Notes:
|
Timeouts
|
Print a job with the display turned off. Note: Display on when printing is the factory default setting. |
Timeouts
|
Set the time before the printer enters Hibernate mode. Note: 3 days is the factory default setting. |
Hibernate Timeout on Connection
|
Set the printer to Hibernate mode even if there is an active Ethernet connection. Notes:
|
Timeouts
|
Set the idle time before the display automatically returns to a Ready state. Note: 30 is the factory default setting. |
Timeouts
|
Set the printer to end a print job after it has been idle for the specified amount of time. Notes:
|
Timeouts
|
Set the time in seconds the printer waits to receive more data from the host. Notes:
|
Timeouts
|
Set the time the printer waits for user intervention before it holds jobs that require unavailable resources. Notes:
|
Error Recovery
|
Set the printer to restart when an error occurs. Note: Reboot always is the factory default setting. |
Error Recovery
|
Determine the number of automatic reboots that the printer can perform. Note: 2 is the factory default setting. |
Print Recovery
|
Let the printer automatically continue printing from certain offline situations when these are not resolved within the specified time period. Note: Disabled is the factory default setting. |
Print Recovery
|
Specify whether the printer reprints jammed pages. Note: Auto is the factory default setting. The printer reprints jammed pages unless other printer tasks need the memory required to hold the pages. |
Print Recovery
|
Set the printer to print the correct output for a page. Note: Off is the factory default setting. |
Accessibility Settings
|
Remain in the same location and reset the Screen Timeout timer instead of returning to the home screen. Note: Off is the factory default setting. |
Accessibility Settings
|
Adjust the Voice Guidance speaking rate. Note: Normal is the factory default setting. |
Accessibility Settings
|
Set the headphones volume. Note: 5 is the factory default setting. |
Information Sent to Lexmark
|
Send anonymous device usage information to Lexmark. Note: The default value depends on what you selected during the initial setup. |
Press Sleep Button
|
Determine how the printer, while in idle state, reacts to a short press of the Sleep button. Note: Sleep is the factory default setting. |
Press and Hold Sleep Button
|
Determine how the printer, while in idle state, reacts to a long press of the Sleep button. Note: Do Nothing is the factory default setting. |
Factory Defaults
|
Use the printer factory default settings. Notes:
|
Export Configuration File
|
Export configuration files to a flash drive. |
Export Compressed Logs File
|
Export the printer compressed logs file to a flash drive. |
Use |
To |
---|---|
Copies
|
Specify a default number of copies for each print job. Note: 1 is the factory default setting. |
Paper Source
|
Set a default paper source for all print jobs. Note: Tray 1 is the factory default setting. |
Color
|
Generate color or black-and-white outputs. Notes:
|
Collate
|
Stack the pages of a print job in sequence when printing multiple copies. Note: “(1,2,3) (1,2,3)” is the factory default setting. |
Sides (Duplex)
|
Specify whether prints are on one side or on both sides of the paper. Note: “1 sided” is the factory default setting. |
Duplex Binding
|
Define binding for duplexed pages in relation to paper orientation. Notes:
|
Paper Saver Orientation
|
Specify the orientation of a multiple-page document. Notes:
|
Paper Saver
|
Print multiple-page images on one side of the paper. Notes:
|
Paper Saver Border
|
Print a border on each page image when using Paper Saver Border. Notes:
|
Paper Saver Ordering
|
Specify the positioning of multiple-page images when using Paper Saver Ordering. Notes:
|
Separator Sheets
|
Specify whether blank separator sheets are inserted. Notes:
|
Separator Sheet Source
|
Specify the paper source for separator sheets. Note: Tray 1 is the factory default setting. |
Blank Pages
|
Specify whether blank pages are inserted in a print job. Note: Do Not Print is the factory default setting. |
Use |
To |
---|---|
Sides (Duplex)
|
Specify whether two-sided (duplex) printing is set as the default for all print jobs. Notes:
|
Duplex Binding
|
Define binding for duplexed pages in relation to page orientation. Notes:
|
Copies
|
Specify the default number of copies for each print job. Note: 1 is the factory default setting. |
Blank Pages
|
Specify whether blank pages are inserted in a print job. Note: Do Not Print is the factory default setting. |
Collate
|
Stack the pages of a print job in sequence when printing multiple copies. Note: “(1,2,3) (1,2,3)” is the factory default setting. |
Separator Sheets
|
Specify whether blank separator sheets are inserted. Notes:
|
Separator Source
|
Specify the paper source for the separator sheet. Note: Tray 1 (standard tray) is the factory default setting. |
Paper Saver
|
Print multiple pages on a single sheet of paper. Notes:
|
Paper Saver Ordering
|
Specify the order in which pages are printed on a single sheet when using Paper Saver. Notes:
|
Paper Saver Orientation
|
Specify the orientation in which pages are printed on a single sheet. Note: Auto is the factory default setting. The printer chooses between portrait and landscape. |
Paper Saver Border
|
Print a border when using Paper Saver. Note: None is the factory default setting. |
Use |
To |
---|---|
Print Mode
|
Specify whether images are printed in black and white or in color. Notes:
|
Color Correction
|
Adjust the color output on the printed page. Notes:
|
Print Resolution
|
Specify the printed output resolution in dots per inch or in color quality (CQ). Note: 4800 CQ is the factory default setting. |
Toner Darkness
|
Lighten or darken the printed output. Notes:
|
Enhance Fine Lines
|
Enable a print mode preferable for files such as architectural drawings, maps, electrical circuit diagrams, and flow charts. Notes:
|
Color Saver
|
Reduce the amount of toner used for graphics and images. The amount of toner used for text is not reduced. Notes:
|
RGB Brightness
|
Adjust the printed output either by lightening or darkening it. You can conserve toner by lightening the output. Note: 0 is the factory default setting. |
RGB Contrast
|
Adjust the contrast of printed objects. Note: 0 is the factory default setting. |
RGB Saturation
|
Adjust saturation in color outputs. Note: 0 is the factory default setting. |
Color Balance
|
Adjust color in printed output by increasing or decreasing the amount of toner being used for each color. Note: 0 is the factory default setting. |
Color Samples
|
Print sample pages for each of the RGB and CMYK color conversion tables used in the printer. Notes:
|
Manual Color
|
Customize the RGB color conversions. Select from the following options:
Notes:
|
Manual Color (continued)
|
Customize the CMYK color conversions. Select from the following options:
Notes:
|
Spot Color Replacement |
Assign specific CMYK values to named spot colors. Note: This menu is available only in the Embedded Web Server. |
Color Adjust |
Initiate a recalibration of color conversion tables and allow the printer to make adjustments for color variations in output. Notes:
|
Use |
To |
---|---|
Job Accounting Log
|
Set if the printer creates a log of the print jobs it receives. Note: Off is the factory default setting. |
Job Accounting Utilities |
Print and delete log files or export them to a flash drive. |
Accounting Log Frequency
|
Set how often a log file is created. Note: Monthly is the factory default setting. |
Log Action at End of Frequency
|
Set how the printer responds when the frequency threshold expires. Note: None is the factory default setting. |
Log Near Full Level
|
Specify the maximum size of the log file before the printer executes the Log Action at Near Full. Note: 5 is the factory default setting. |
Log Action at Near Full
|
Set how the printer responds when the hard disk is nearly full. Notes:
|
Log Action at Full
|
Set how the printer responds when disk usage reaches the maximum limit (100MB). Note: None is the factory default setting. |
URL to Post Logs |
Set where the printer posts job accounting logs. |
E-mail to Send Logs |
Specify the e-mail address to which the device sends job accounting logs. |
Log File Prefix |
Specify the prefix you want for the log file name. Note: The current host name defined in the TCP/IP menu is used as the default log file prefix. |
Use |
To |
---|---|
Remove Held Jobs
|
Delete confidential and held jobs from the printer hard disk. Notes:
|
Format Flash
|
Format the flash memory. Warning—Potential Damage: Do not turn off the printer while the flash memory is being formatted. Notes:
|
Delete Downloads on Disk
|
Delete downloads from the printer hard disk, including all held jobs, buffered jobs, and parked jobs. Notes:
|
Activate Hex Trace |
Assist in isolating the source of a print job problem. Notes:
|
Coverage Estimator
|
Provide an estimate of the percentage coverage of toner on a page. The estimate is printed on a separate page at the end of each print job. Note: Off is the factory default setting. |
Use |
To |
---|---|
Print Error Pages
|
Print a page containing information on errors, including XML markup errors. Note: Off is the factory default setting. |
Use |
To |
---|---|
Scale to Fit
|
Scale page content to fit the selected paper size. Note: No is the factory default setting. |
Annotations
|
Print annotations in a PDF. Note: Do Not Print is the factory default setting. |
Use |
To |
---|---|
Print PS Error
|
Print a page containing the PostScript error. Note: Off is the factory default setting. |
Lock PS Startup Mode
|
Enable users to disable the SysStart file. Note: Off is the factory default setting. |
Font Priority
|
Establish the font search order. Notes:
|
Image Smoothing
|
Enhance the contrast and sharpness of low-resolution images and smoothen their color transitions. Notes:
|
Use |
To |
---|---|
Font Source
|
Specify the set of fonts used in the Font Name menu. Notes:
|
Font Name
|
Identify a specific font and where it is stored. Note: Courier 10 is the factory default setting. |
Symbol Set
|
Specify the symbol set for each font name. Notes:
|
PCL Emulation Settings
|
Change the point size for scalable typographic fonts. Notes:
|
PCL Emulation Settings
|
Specify the font pitch for scalable monospaced fonts. Notes:
|
PCL Emulation Settings
|
Specify the orientation of text and graphics on a page. Notes:
|
PCL Emulation Settings
|
Specify the number of lines that print on each page. Notes:
|
PCL Emulation Settings
|
Set the printer to print on A4-size paper. Notes:
|
PCL Emulation Settings
|
Specify whether the printer automatically performs a carriage return (CR) after a line feed (LF) control command. Note: Off is the factory default setting. |
PCL Emulation Settings
|
Specify whether the printer automatically performs a line feed (LF) after a carriage return (CR) control command. Note: Off is the factory default setting. |
Tray Renumber
|
Configure the printer to work with printer software or programs that use different source assignments for trays and feeders. Notes:
|
Tray Renumber
|
Show the factory default setting assigned to each tray or feeder. |
Tray Renumber
|
Restore all tray and feeder assignments to the factory default settings. |
Use |
To |
|
---|---|---|
Font Name
|
|
Set the default font for HTML documents. Note: The Times font is used in HTML documents that do not specify a font. |
Use |
To |
---|---|
Font Size
|
Set the default font size for HTML documents. Notes:
|
Scale
|
Scale the default font for HTML documents. Notes:
|
Orientation
|
Set the page orientation for HTML documents. Note: Portrait is the factory default setting. |
Margin Size
|
Set the page margin for HTML documents. Notes:
|
Backgrounds
|
Specify whether to print backgrounds on HTML documents. Note: Print is the factory default setting. |
Use |
To |
---|---|
Auto Fit
|
Select the optimal paper size, scaling, and orientation. Note: On is the factory default setting. It overrides scaling and orientation settings for some images. |
Invert
|
Invert bitonal monochrome images. Notes:
|
Scaling
|
Scale the image to fit the selected paper size. Notes:
|
Orientation
|
Set the image orientation. Note: Portrait is the factory default setting. |