Cleaning the printer

 CAUTION—SHOCK HAZARD: To avoid the risk of electrical shock when cleaning the exterior of the printer, unplug the power cord from the electrical outlet and disconnect all cables from the printer before proceeding.

Notes:

• Perform this task after every few months.
• Damage to the printer caused by improper handling is not covered by the printer warranty.

1. Turn off the printer, and then unplug the power cord from the electrical outlet.

2. Remove paper from the standard bin and multipurpose feeder.

3. Remove any dust, lint, and pieces of paper around the printer using a soft brush or vacuum.

4. Wipe the outside of the printer with a damp, soft, lint-free cloth.

   Notes:

   • Do not use household cleaners or detergents, as they may damage the finish of the printer.
   • Make sure that all areas of the printer are dry after cleaning.

5. Connect the power cord to the electrical outlet, and then turn on the printer.

    CAUTION—POTENTIAL INJURY: To avoid the risk of fire or electrical shock, connect the power cord to an appropriately rated and properly grounded electrical outlet that is near the product and easily accessible.

Cleaning the touch screen

 CAUTION—SHOCK HAZARD: To avoid the risk of electric shock when cleaning the exterior of the printer, unplug the power cord from the electrical outlet and disconnect all cables from the printer before proceeding.

1. Turn off the printer, and then unplug the power cord from the electrical outlet.

2. Using a damp, soft, lint-free cloth, wipe the touch screen.

   Notes:

   • Do not use household cleaners or detergents, as they may damage the touch screen.
   • Make sure that the touch screen is dry after cleaning.

3. Connect the power cord to the electrical outlet, and then turn on the printer.

    CAUTION—POTENTIAL INJURY: To avoid the risk of fire or electrical shock, connect the power cord to an appropriately rated and properly grounded electrical outlet that is near the product and easily accessible.

Cleaning the pick tires

1. Turn off the printer, and then unplug the power cord from the electrical outlet.

2. Remove the tray.

   

3. Remove the pick roller.

   

4. Apply isopropyl alcohol to a soft, lint-free cloth, and then wipe the pick tires.

5. Insert the pick roller.

   

6. Insert the tray.

7. Connect the power cord to the electrical outlet, and then turn on the printer.

    CAUTION—POTENTIAL INJURY: To avoid the risk of fire or electrical shock, connect the power cord to an appropriately rated and properly grounded electrical outlet that is near the product and easily accessible.

Cleaning the pick roller in the multipurpose feeder

1. Turn off the printer, and then unplug the power cord from the electrical outlet.

2. Open the multipurpose feeder.

   

3. Remove the pick roller.

   

4. Apply isopropyl alcohol to a soft, lint-free cloth, and then wipe the pick roller.

5. Insert the pick roller.

   

6. Close the multipurpose feeder.

7. Connect the power cord to the electrical outlet, and then turn on the printer.

    CAUTION—POTENTIAL INJURY: To avoid the risk of fire or electrical shock, connect the power cord to an appropriately rated and properly grounded electrical outlet that is near the product and easily accessible.