Adjusting color

Wait for the process to complete.

Change [paper source] to [custom type name]

Try one or more of the following:

• Load the correct size and type of paper in the tray, and then select Finished changing paper on the printer control panel to clear the message and continue printing. For non-touch-screen printer models, press to confirm.

  Note:  Make sure the paper size and type are specified in the Paper menu on the printer control panel.

• Cancel the print job.

Change [paper source] to [custom string]

Try one or more of the following:

• Load the correct size and type of paper in the tray, and then select Finished changing paper on the printer control panel to clear the message and continue printing. For non-touch-screen printer models, press to confirm.

  Note:  Make sure the paper size and type are specified in the Paper menu on the printer control panel.

• Cancel the print job.

Change [paper source] to [paper type] [paper size]

Try one or more of the following:

• Load the correct size and type of paper in the tray, and then select Finished changing paper on the printer control panel to clear the message and continue printing. For non-touch-screen printer models, press to confirm.

  Note:  Make sure the paper size and type are specified in the Paper menu on the printer control panel.

• Cancel the print job.

Close door

Make sure the right side cover is installed, and then close the front and top doors to clear the message.

Close flatbed cover and load originals if restarting job [2yy.xx]

From the printer control panel, try one or more of the following:

• Select Scan from automatic feeder , and then press to continue scanning from the ADF immediately after the last successful scan job.

• Select Scan from flatbed , and then press to continue scanning from the scanner glass immediately after the last successful scan job.

• Select Finish job without further scanning , and then press to end the last successful scan job.

  Note:  This does not cancel the scan job. All successfully scanned pages will be processed further for copying or e-mailing.

• Select Restart Job , and then press to restart the scan job with the same settings from the previous scan job.

• Select Cancel Job , and then press to clear the message and cancel the scan job.

[Color] cartridge low [88.xy]

You may need to order a toner cartridge. If necessary, select Continue to clear the message and continue printing. For non-touch-screen printer models, press to confirm.

[Color] cartridge nearly low [88.xy]

If necessary, select Continue on the printer control panel to clear the message and continue printing. For non-touch-screen printer models, press to confirm.

[Color] cartridge very low, [x] estimated pages remain [88.xy]

You may need to replace the toner cartridge very soon. For more information, see the “Replacing supplies” section of the User’s Guide .

If necessary, select Continue on the printer control panel to clear the message and continue printing. For non-touch-screen printer models, press to confirm.

Complex page, some data may not have printed [39]

Try one or more of the following:

• From the printer control panel, select Continue to ignore the message and continue printing. For non-touch-screen printer models, press to confirm.

• Cancel the current print job. For non-touch-screen printer models, press to confirm.

• Install additional printer memory.

Configuration change, some held jobs were not restored [57]

Held jobs are invalidated because of any of the following possible changes in the printer:

• The printer firmware has been updated.

• The tray for the print job is removed.

• The print job is sent from a flash drive that is no longer attached to the USB port.

• The printer hard disk contains print jobs that were stored when the hard disk was installed in a different printer model.

From the printer control panel, select Continue to clear the message. For non-touch-screen printer models, press to confirm.

Defective flash detected [51]

Try one or more of the following:

• Replace the defective flash memory card.

• From the printer control panel, select Continue to ignore the message and continue printing. For non-touch-screen printer models, press to confirm.

• Cancel the current print job.

Error reading USB drive. Remove USB.

An unsupported USB device is inserted. Remove the USB device, and then insert a supported one.

Error reading USB hub. Remove hub.

An unsupported USB hub has been inserted. Remove the USB hub, and then install a supported one.

Incompatible tray [x] [59]

Remove, and then reinstall the indicated tray to clear the message.

Incorrect paper size, open [paper source] [34]

Try one or more of the following:

• Load the correct size of paper in the paper source.

• From the printer control panel, select Continue to clear the message and print using a different paper source. For non-touch-screen printer models, press to confirm.

• Check the length and width guides of the paper source and make sure the paper is loaded properly.

• Make sure the correct paper size and type are specified in the Printing Preferences or in the Print dialog.

• Make sure the paper size and type are specified in the Paper menu on the printer control panel.

• Make sure that the paper size is correctly set. For example, if Multipurpose Feeder Size is set to Universal, then make sure the paper is large enough for the data being printed.

• Cancel the print job.

Insert Tray [x]

Insert the indicated tray into the printer.

Insufficient memory, some Held Jobs were deleted [37]

The printer deleted some held jobs in order to process current jobs.

Select Continue to clear the message. For non-touch-screen printer models, press to confirm.

Insufficient memory to collate job [37]

Try one or more of the following:

• From the printer control panel, select Continue to print the part of the job already stored and begin collating the rest of the print job. For non-touch-screen printer models, press to confirm.

• Cancel the current print job.

Insufficient memory to support Resource Save feature [35]

Install additional printer memory or select Continue on the printer control panel to disable Resource Save, clear the message, and continue printing. For non-touch-screen printer models, press to confirm.

Insufficient memory, some held jobs will not be restored [37]

Try one or more of the following:

• From the printer control panel, select Continue to clear the message. For non-touch-screen printer models, press to confirm.

• Delete other held jobs to free up additional printer memory.

Load [paper source] with [custom type name]

Try one or more of the following:

• Load the tray or feeder with the correct size and type of paper.

• To use the tray with the correct paper size or type, select Finished loading paper on the printer control panel. For non-touch-screen printer models, press to confirm.

  Note:  If the printer detects a tray that has the correct paper type and size, then it feeds from that tray. If the printer cannot detect a tray that has the correct paper type and size, then it prints from the default paper source.

• Cancel the current job.

Load [paper source] with [custom string]

Try one or more of the following:

• Load the indicated tray or feeder with the correct size and type of paper.

• To use the tray with the correct paper size or type, select Finished loading paper on the printer control panel. For non-touch-screen printer models, press to confirm.

  Note:  If the printer finds a tray that has the correct paper type and size, then it feeds from that tray. If the printer cannot find a tray with the correct paper type and size, then it prints from the default paper source.

• Cancel the current job.

Load [paper source] with [paper size]

Try one or more of the following:

• Load the tray or feeder with the correct size of paper.

• To use the tray or feeder with the correct paper size, select Finished loading paper on the printer control panel. For non-touch-screen printer models, press to confirm.

  Note:  If the printer detects a tray that has the correct paper size, then it feeds from that tray. If the printer cannot detect a tray that has the correct paper size, then it prints from the default paper source.

• Cancel the current job.

Load [paper source] with [paper type] [paper size]

Try one or more of the following:

• Load the tray or feeder with the correct size and type of paper.

• To use the tray or feeder with the correct paper size and type, select Finished loading paper on the printer control panel. For non-touch-screen printer models, press to confirm.

  Note:  If the printer detects a tray that has the correct paper size and type, then it feeds from that tray. If the printer cannot detect a tray that has the correct paper size and type, then it prints from the default paper source.

• Cancel the current job.

Load Manual Feeder with [custom string]

Try one or more of the following:

• Load the feeder with the correct size and type of paper.

• Depending on your printer model, touch Prompt each page, paper loaded or press on the printer control panel to clear the message and continue printing.

• Cancel the current job.

Load Manual Feeder with [custom type name]

Try one or more of the following:

• Load the feeder with the correct size and type of paper.

• Depending on your printer model, touch Prompt each page, paper loaded or press on the printer control panel to clear the message and continue printing.

• Cancel the current job.

Load Manual Feeder with [paper size]

Try one or more of the following:

• Load the feeder with the correct size of paper.

• Depending on your printer model, touch Prompt each page, paper loaded or press on the printer control panel to clear the message and continue printing.

• Cancel the current job.

Load Manual Feeder with [paper type] [paper size]

Try one or more of the following:

• Load the feeder with the correct size and type of paper.

• Depending on your printer model, touch Prompt each page, paper loaded or press on the printer control panel to clear the message and continue printing.

• Cancel the current job.

Maintenance kit low [80.xy]

You may need to order a maintenance kit. For more information, visit the Lexmark support Web site at http://support.lexmark.com or contact customer support, and then report the message.

If necessary, select Continue to clear the message and continue printing. For non-touch-screen printer models, press to confirm.

Maintenance kit nearly low [80.xy]

For more information, visit the Lexmark support Web site at http://support.lexmark.com or contact customer support, and then report the message.

If necessary, select Continue to clear the message and continue printing. For non-touch-screen printer models, press to confirm.

Maintenance kit very low [80.xy]

You may need to replace the maintenance kit very soon. For more information, go to http://support.lexmark.com or contact customer support.

If necessary, press on the printer control panel to clear the message and continue printing.

Memory full [38]

Try one or more of the following:

• From the printer control panel, select Cancel job to clear the message. For non-touch-screen printer models, press to confirm.

• Install additional printer memory.

Network [x] software error [54]

Try one or more of the following:

• From the printer control panel, select Continue to continue printing. For non-touch-screen printer models, press to confirm.

• Turn off the printer, wait for about 10 seconds, and then turn the printer back on.

• Update the network firmware in the printer or print server. For more information, visit the Lexmark support Web site at http://support.lexmark.com .

Not enough free space in flash memory for resources [52]

Try one or more of the following:

• From the printer control panel, select Continue to clear the message and continue printing. For non-touch-screen printer models, press to confirm.

• Delete fonts, macros, and other data stored in the flash memory.

• Upgrade to a larger capacity flash memory card.

Note:  Downloaded fonts and macros that are not previously stored in the flash memory are deleted.

Non-Lexmark [supply type], see User's Guide [33.xy]

The printer has detected a non-Lexmark supply or part installed in the printer.

Your Lexmark printer is designed to function best with genuine Lexmark supplies and parts. Use of third-party supplies or parts may affect the performance, reliability, or life of the printer and its imaging components. For more information, see Using genuine Lexmark parts and supplies .

All life indicators are designed to function with Lexmark supplies and parts, and may deliver unpredictable results if third-party supplies or parts are used. Imaging component usage beyond the intended life may damage your Lexmark printer or its associated components.

To accept any and all of these risks, and to proceed with the use of non-genuine supplies or parts in your printer, press and on the control panel simultaneously for 15 seconds to clear the message and continue printing.

If you do not want to accept these risks, then remove the third-party supply or part from your printer and install a genuine Lexmark supply or part.

Printer had to restart. Last job may be incomplete.

From the printer control panel, press to clear the message and continue printing.

For more information, go to http://support.lexmark.com or contact customer support.

Reinstall missing or unresponsive [color] cartridge [31.xy]

Try one or more of the following:

• Check if the toner cartridge is missing. If missing, then install the toner cartridge.

  For information on installing the toner cartridge, see the “Replacing supplies” section.

• If the toner cartridge is installed, then remove and reinstall the unresponsive toner cartridge.

  Note:  If the message appears after reinstalling the supply, then replace the toner cartridge. The cartridge may be defective or a non-genuine Lexmark supply. For more information, see Using genuine Lexmark parts and supplies .

Reinstall missing or unresponsive black and color imaging kit and all cartridges [31.xy]

Try one or more of the following:

• Check if the imaging kit is missing. If missing, then install the imaging kit.

  For information on installing the imaging kit, see the “Replacing supplies” section.

• If the imaging kit is installed, then remove and reinstall the unresponsive imaging kit.

  Note:  If the message appears after reinstalling the supply, then replace the imaging kit. The imaging kit may be defective or a non-genuine Lexmark supply. For more information, see Using genuine Lexmark parts and supplies .

Reload printed pages in Tray [x]

Try any of the following:

• From the printer control panel, select Continue to clear the message and continue printing the second side of the sheet. For non-touch-screen printer models, press to confirm.

• Cancel the print job.

Remove packaging material, [area name]

1. Remove any remaining packing material from the indicated location.

2. From the printer control panel, touch Continue to clear the message. For non-touch-screen printer models, press to confirm.

Remove paper from standard output bin

Remove the paper stack from the standard bin.

Replace [type] imaging kit, 0 estimated pages remain [84.xy]

Replace the indicated imaging kit to clear the message and continue printing. For more information, see the instruction sheet that came with the supply.

Replace all originals if restarting job.

From the printer control panel, try one or more of the following:

• Select Scan from automatic feeder , and then press to continue scanning from the ADF immediately after the last successful scan job.

• Select Scan from flatbed , and then press to continue scanning from the scanner glass immediately after the last successful scan job.

• Select Finish job without further scanning , and then press to end the last successful scan job.

  Note:  This does not cancel the scan job. All successfully scanned pages will be processed further for copying or e-mailing.

• Select Restart Job , and then press to restart the scan job with the same settings from the previous scan job.

• Select Cancel Job , and then press to clear the message and cancel the scan job.

Replace jammed originals if restarting job.

From the printer control panel, try one or more of the following:

• Select Scan from automatic feeder , and then press to continue scanning from the ADF immediately after the last successful scan job.

• Select Scan from flatbed , and then press to continue scanning from the scanner glass immediately after the last successful scan job.

• Select Finish job without further scanning , and then press to end the last successful scan job.

  Note:  This does not cancel the scan job. All successfully scanned pages will be processed further for copying or e-mailing.

• Select Restart Job , and then press to restart the scan job with the same settings from the previous scan job.

• Select Cancel Job , and then press to clear the message and cancel the scan job.

Replace maintenance kit [80.xy]

The printer is scheduled for maintenance. For more information, go to http://support.lexmark.com or contact your service representative, and then report the message.

Replace missing [type] imaging kit [31.xy]

Install the indicated imaging kit to clear the message. For more information, see the “Replacing supplies” section of the User’s Guide .

Replace missing waste toner bottle [31.xyz]

Install the missing waste toner bottle to clear the message. For more information, see the instruction sheet that came with the supply.

Replace unsupported [color] cartridge [32.xy]

Remove the toner cartridge, and then install a supported one to clear the message and continue printing. For more information, see the instruction sheet that came with the supply.

The following error codes indicate that a non-genuine Lexmark toner cartridge is installed:

32.13

32.16

32.19

32.22

32.25

32.28

32.31

32.34

32.37

For more information, see Using genuine Lexmark parts and supplies .

Replace unsupported black and color imaging kit [32.xy]

Remove the indicated imaging kit, and then install a supported one to clear the message and continue printing. For more information, see the instruction sheet that came with the supply.

The following error codes indicate that a non-genuine Lexmark imaging kit is installed:

32.00

32.01

32.02

32.07

32.08

32.09

32.36

32.37

32.51

32.52

32.55

32.56

32.57

32.58

32.59

For more information, see Using genuine Lexmark parts and supplies .

Replace waste toner bottle [82.xy]

Replace the waste toner bottle to clear the message.

Scanner automatic feeder cover open

Close the ADF cover.

Scanner disabled by admin [840.01]

Print without the scanner, or contact your system support person.

Scanner disabled. Contact system administrator if problem persists. [840.02]

From the printer control panel, try one or more of the following:

• Select Continue with scanner disabled to return to the home screen, and then contact your system support person.

• Select Reboot and automatically enable scanner to cancel the job.

  Note:  This attempts to enable the scanner.

• For non-touch-screen printer models, press to confirm.

Scanner jam, remove all originals from the scanner [2yy.xx]

Remove the jammed paper from the scanner.

Scanner jam, remove jammed originals from the scanner [2yy.xx]

Remove the jammed paper from the scanner.

SMTP server not set up. Contact system administrator.

From the printer control panel, press to clear the message.

Standard network software error [54]

Try one or more of the following:

• From the printer control panel, select Continue to continue printing. For non-touch-screen printer models, press to confirm.

• Turn off the printer and then turn it back on.

• Update the network firmware in the printer or print server. For more information, visit the Lexmark support Web site at http://support.lexmark.com .

Standard USB port disabled [56]

From the printer control panel, select Continue to clear the message. For non-touch-screen printer models, press to confirm.

Notes:

• The printer discards any data received through the USB port.
• Make sure the USB Buffer menu is not set to Disabled.

Supply needed to complete job

Try one or more of the following:

• From the printer control panel, touch Prompt for supplies to view all error messages that indicate what supplies are needed to continue processing the current job. For non-touch-screen printer models, press to clear the message and continue printing.

  1. Order the missing supply immediately.

  2. Install the supply. For more information, see the instruction sheet that came with the supply.

• Cancel the print job, then install the missing supply, and then resend the print job.

Too many flash options installed [58]

1. Turn off the printer.

2. Unplug the power cord from the electrical outlet.

3. Remove the extra flash memory.

4. Connect the power cord to a properly grounded electrical outlet.

5. Turn the printer back on.

Too many trays attached [58]

1. Turn off the printer.

2. Unplug the power cord from the electrical outlet.

3. Remove the extra trays.

4. Connect the power cord to a properly grounded electrical outlet.

5. Turn the printer back on.

[Type] imaging kit low [84.xy]

You may need to order an imaging kit. If necessary, select Continue on the printer control panel to clear the message and continue printing. For non-touch-screen printer models, press to confirm.

[Type] imaging kit nearly low [84.xy]

If necessary, select Continue on the printer control panel to clear the message and continue printing. For non-touch-screen printer models, press to confirm.

[Type] imaging kit very low, [x] estimated pages remain [84.xy]

You may need to replace the imaging kit very soon. For more information, see the “Replacing supplies” section of the User’s Guide .

If necessary, select Continue on the printer control panel to clear the message and continue printing. For non-touch-screen printer models, press to confirm.

Unformatted flash detected [53]

Try one or more of the following:

• From the printer control, select Continue to stop the defragmentation and continue printing. For non-touch-screen printer models, press to confirm.

• Format the flash memory.

Note:  If the error message remains, then the flash memory may be defective and need to be replaced.

Waste toner bottle nearly full [82.xy]

You may need to order a waste toner bottle. If necessary, select Continue on the printer control panel to clear the message and continue printing. For non-touch-screen printer models, press to confirm.

Weblink server not set up. Contact system administrator.

From the printer control panel, press to clear the message.