网络连接

注意:

准备在以太网络上设置打印机

要配置您的打印机连接到以太网络,请在开始之前组织下列信息:

注意: 如果您的网络自动分配 IP 地址给计算机和打印机,请继续安装打印机。

您将需要以太网电缆来连接打印机到网络和可用的端口,打印机能够从此物理连接到网络。尽可能使用新的网络电缆,以避免由于损坏的电缆而造成的潜在问题。

准备在无线网络上设置打印机

注意:

确认您在无线网络上设置打印机之前有下列信息:

使用“无线设置向导”来连接打印机

在您开始之前,请确认:

注意: 确认关闭打印机电源,接着等待至少 5 秒钟,然后重新打开打印机电源。
  1. 从打印机控制面板,导览至:

    the menu button > 设置 > the select button > 网络/端口 > the select button > 网络 [x] > the select button > 网络 [x] 设置 > the select button > 无线 > the select button > 无线连接设置 > the select button

  2. 选择一种无线连接设置。

    使用

    搜索网络

    显示可用的无线连接。

    注意: 此菜单项显示所有广播安全或不安全的 SSID。

    输入网络名称

    手动键入 SSID。

    注意: 确认键入正确的 SSID。

    Wi-Fi Protected Setup

    使用 Wi-Fi Protected Setup 将打印机连接到无线网络。


  3. the select button,然后按照打印机显示屏上的指导进行操作。

使用 Wi-Fi rotected Setup 将打印机连接到无线网络

在您开始之前,请确认:

使用“按按钮配置(PBC)”方法
  1. 从打印机控制面板,导览至:

    the menu button > 设置 > the select button > 网络/端口 > the select button > 网络 [x] > the select button > 网络 [x] 设置 > the select button > 无线 > the select button > 无线连接设置 > the select button > Wi-Fi Protected Setup > the select button > 启动按按钮方法 > the select button

  2. 按照打印机显示屏上的指导进行操作。

使用“个人身份识别码(PIN)”方法
  1. 从打印机控制面板,导览至:

    the menu button > 设置 > the select button > 网络/端口 > the select button > 网络 [x] > the select button > 网络 [x] 设置 > the select button > 无线 > the select button > 无线连接设置 > the select button > Wi-Fi Protected Setup > the select button > 启动 PIN 方法 > the select button

  2. 复制 8 位的 WPS PIN 码。

  3. 打开 Web 浏览器,然后在地址栏中键入您访问点的 IP 地址。

    注意:

    • IP 地址显示为用小数点分隔的四组数字,例如 123.123.123.123。
    • 如果您正在使用代理服务器,请临时禁用它以便正确加载 Web 页。
  4. 访问 WPS 设置。如需更多信息,请参阅随访问点附带的文档。

  5. 输入 8 位 PIN 码,然后保存设置。

使用 Embedded Web Server 将打印机连接到无线网络

在您开始之前,请确认:

  1. 打开 Web 浏览器,然后在地址字段中键入打印机 IP 地址。

    注意:

    • 在打印机控制面板上查看打印机 IP 地址。IP 地址显示为用小数点分隔的四组数字,例如 123.123.123.123。
    • 如果您正在使用代理服务器,请临时禁用它以便正确加载 Web 页。
  2. 单击设置 > 网络/端口 > 无线

  3. 修改设置以匹配您的访问点(无线路由器)的设置。

    注意: 确认输入正确的 SSID、安全方法、预共享密钥或密码、网络模式和通道。
  4. 单击提交

  5. 关闭打印机电源,然后断开以太网电缆。等待至少 5 秒钟,然后重新打开打印机电源。

  6. 为检验打印机是否已连接到网络,请打印网络设置页。然后在“网卡 [x]”部分中,查看状态是否为 Connected(已连接)。