You can export the configuration settings of your printer into a text file, and then import the file to apply the settings to other printers.
Open a web browser, and then type the printer IP address in the address field.
Notes:
From the Embedded Web Server, click Export Configuration or Import Configuration.
Follow the instructions on the screen.
If the printer supports applications, then do the following:
Click Apps > select the application > Configure.
Click Export or Import.
This method is applicable only in some printer models.
From the control panel, navigate to the notification center, and then select Firmware update available.
Select Install now.
The printer reboots automatically after the update.
From the control panel, navigate to Settings > Device > Update Firmware.
Depending on your printer model, select Check for updates or Check for updates now.
If a new update is available, then select Install now.
The printer reboots automatically after the update.
Before you begin, make sure that:
You have downloaded the latest printer firmware from https://support.lexmark.com and saved it to your flash drive or computer.
You are not using a special code on your printer to avoid losing this functionality.
If the printer is connected to the network when checking for updates, then downloading the firmware is not required.
Open a web browser, and then type the printer IP address in the address field.
Notes:
Click Device.
Scroll down, and then click Update Firmware.
Depending on your printer model, click Check for updates or Check for updates now.
If a new update is available, then click I agree, start update.
The printer reboots automatically after the update.