Exporting or importing a configuration file

You can export the configuration settings of your printer into a text file, and then import the file to apply the settings to other printers.

1. Open a web browser, and then type the printer IP address in the address field.

   Notes:

   • View the printer IP address on the printer home screen. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123.
   • If you are using a proxy server, then temporarily disable it to load the web page correctly.

2. From the Embedded Web Server, click Export Configuration or Import Configuration.

3. Follow the instructions on the screen.

4. If the printer supports applications, then do the following:

   1. Click Apps > select the application > Configure.

   2. Click Export or Import.

Updating firmware

Some applications require a minimum device firmware level to operate correctly.

For more information on updating the device firmware, contact your Lexmark representative.

1. Open a web browser, and then type the printer IP address in the address field.

   Notes:

   • View the printer IP address on the printer home screen. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123.
   • If you are using a proxy server, then temporarily disable it to load the web page correctly.

2. Click Settings > Device > Update Firmware.

3. Browse to the flash file.

4. Click Upload.