Default Source

Tray [x] (1*)

Multipurpose Feeder

Manual Paper

Manual Envelope

Set the paper source for all print jobs.

Paper Size/Type

Tray [x]

Multipurpose Feeder

Manual Paper

Manual Envelope

Specify the paper size or paper type loaded in each paper source.

Substitute Size

Off

Letter/A4

All Listed*

Set the printer to substitute a specified paper size if the requested size is not loaded in any paper source.

Notes:

• Off prompts the user to load the required paper size.
• All Listed allows all available substitutions.

Configure MP

Cassette*

Manual

First

Determine the behavior of the multipurpose feeder.

Notes:

• Cassette configures the multipurpose feeder as the automatic paper source.
• Manual sets the multipurpose feeder only for manual-feed print jobs.
• First configures the multipurpose feeder as the primary paper source.

Units of Measure

Inches

Millimeters

Specify the unit of measurement for the universal paper.

Note: Inches is the U.S. factory default setting. Millimeters is the international factory default setting.

Portrait Width

3–52 inches (8.5*)

76–1321 mm (216*)

Set the portrait width of the universal paper.

Portrait Height

3–52 inches (14*)

76.2–1321 mm (356*)

Set the portrait height of the universal paper.

Feed Direction

Short Edge*

Long Edge

Set the printer to pick paper from the short edge or long edge direction.

Note: Long Edge appears only when the longest edge is shorter than the maximum width supported.

Custom Scan Size [x]

Scan Size Name

Width

1–8.5 inches (8.5*)

25.4–215.9 mm (215.9*)

Height

1–25 inches (11*)

25.4–635 mm (279.4*)

Orientation

Portrait*

Landscape

2 scans per side

Off*

On

Assign a scan size name and configure the scan settings.

Plain

Card Stock

Recycled

Glossy

Labels

Vinyl Labels

Bond

Envelope

Letterhead

Preprinted

Colored Paper

Light

Heavy

Rough/Cotton

Custom Type [X]

Specify the texture, weight, and orientation of the paper.