Menu item | Description |
---|---|
Note: An asterisk (*) next to a value indicates the factory default setting. | |
Content Type
| Improve the output result based on the content of the original document. |
Content Source
| Improve the output result based on the source of the original document. |
Sides
| Specify the scanning behavior based on the original document. |
Separator Sheets
| Specify whether to insert blank separator sheets when printing. |
Separator Sheet Source
| Specify the paper source for the separator sheet. |
Color
| Set the printer to generate color output from a scan job. |
Pages per Side
| Specify the number of page images to print on one side of a sheet of paper. |
Print Page Borders
| Place a border around each image when printing multiple pages on a single page. |
Collate
| Print multiple copies in sequence. |
Offset Pages
| Offset the output of each print job or each copy of a print job. Notes:
|
Staple
| Specify the staple position for all print jobs. Note: This menu item appears only when a finisher is installed. |
Punch
| Punch holes on the printed output. Note: This menu item appears only when a multiposition staple, hole punch finisher is installed. |
“Copy from” Size[List of paper sizes] | Set the paper size of the original document. Note: Letter is the U.S. factory default setting. A4 is the international factory default setting. |
“Copy to” Source
| Specify the paper source for the copy job. |
Temperature
| Specify whether to generate a cooler or warmer output. |
Darkness
| Adjust the darkness of the scanned image. |
Number of Copies
| Specify the number of copies. |
Header/Footer
| Specify the header or footer information on the scanned image. |
Overlay
| Specify the overlay text to print on each copy. |
Custom overlay | Type the text for the Custom choice in Overlay menu. |