Network/Ports

Network Overview

Menu item	Description
Note: An asterisk (*) next to a value indicates the factory default setting.
Active Adapter Auto* Standard Network Wireless	Specify the type of the network connection. Note: Wireless is available only in printers connected to a wireless network.
Network Status	Show the connectivity status of the printer network.
Display Network Status on Printer Off On*	Show the network status on the display.
Speed, Duplex	Show the speed of the currently active network card.
IPv4	Show the IPv4 address.
All IPv6 Addresses	Show all IPv6 addresses.
Reset Print Server	Reset all active network connections to the printer. Note: This setting removes all network configuration settings.
Network Job Timeout Off On* (90 seconds)	Set the time before the printer cancels a network print job.
Banner Page Off* On	Print a banner page.
Enable Network Connections Off On*	Enable the printer to connect to a network.
Enable LLDP Off* On	Enable Link Layer Discovery Protocol (LLDP) in the printer.

Menu item

Description

Active Adapter

Auto*

Standard Network

Wireless

Specify the type of the network connection.

Note: Wireless is available only in printers connected to a wireless network.

Network Status

Show the connectivity status of the printer network.

Display Network Status on Printer

Off

On*

Show the network status on the display.

Speed, Duplex

Show the speed of the currently active network card.

IPv4

Show the IPv4 address.

All IPv6 Addresses

Show all IPv6 addresses.

Reset Print Server

Reset all active network connections to the printer.

Note: This setting removes all network configuration settings.

Network Job Timeout

Off

On* (90 seconds)

Set the time before the printer cancels a network print job.

Banner Page

Off*

On

Print a banner page.

Enable Network Connections

Off

On*

Enable the printer to connect to a network.

Enable LLDP

Off*

On

Enable Link Layer Discovery Protocol (LLDP) in the printer.

Wireless

Note: This menu is available only in printers connected to a Wi-Fi network or printers that have a wireless network adapter.

Menu item	Description
Setup Using Mobile App	Configure the wireless connection using Lexmark Mobile Assistant.
Setup On Printer Panel Choose Network Add Wi-Fi Network Network Name Network Mode (Infrastructure) Wireless Security Mode (Disabled)	Configure the wireless connection using the control panel.
Wi-Fi Protected Setup Start Push Button Method Start PIN Method	Establish a Wi-Fi network and enable network security.
Enable Wi-Fi Direct On Off*	Enable Wi-Fi Direct-capable devices to connect to the printer.
Compatibility 802.11b/g/n (2.4GHz) 802.11a/b/g/n/ac (2.4GHz/5GHz)* 802.11a/n/ac (5GHz)	Specify the standard for the Wi-Fi network.
Wireless Security Mode Disabled* WEP WPA2/WPA-Personal WPA2-Personal 802.1x - RADIUS	Set the security mode for connecting the printer to Wi-Fi devices.
IPv4 Enable DHCP (On*) Set Static IP Address	Configure the IPv4 settings.
IPv6 Enable IPv6 (On) Enable DHCPv6 (Off) Stateless Address Autoconfiguration (On) DNS Server Address Manually Assigned IPv6 Address Manually Assigned IPv6 Router Address Prefix (64) All IPv6 Addresses All IPv6 Router Addresses	Configure the IPv6 settings.
Network Address	Specify the network address.
PCL SmartSwitch Off On*	Set the printer to switch automatically to PCL emulation when a print job requires it, regardless of the default printer language. Note: When this setting is disabled, the printer does not examine incoming data and uses the default printer language specified in the Setup menu.
PS SmartSwitch Off On*	Set the printer to switch automatically to PostScript emulation when a print job requires it, regardless of the default printer language. Note: When this setting is disabled, the printer does not examine incoming data and uses the default printer language specified in the Setup menu.
Job Buffering Off* On	Temporarily store print jobs on the hard disk before printing. Note: This menu item appears only when a hard disk is installed.
Mac Binary PS Auto* On Off	Set the printer to process Macintosh binary PostScript print jobs. Notes: On processes raw binary PostScript print jobs. Off filters print jobs using the standard protocol.

Menu item

Description

Setup Using Mobile App

Configure the wireless connection using Lexmark Mobile Assistant.

Setup On Printer Panel

Choose Network

Add Wi-Fi Network

Network Name

Network Mode (Infrastructure*)

Wireless Security Mode (Disabled*)

Configure the wireless connection using the control panel.

Wi-Fi Protected Setup

Start Push Button Method

Start PIN Method

Establish a Wi-Fi network and enable network security.

Enable Wi-Fi Direct

On

Off*

Enable Wi-Fi Direct-capable devices to connect to the printer.

Compatibility

802.11b/g/n (2.4GHz)

802.11a/b/g/n/ac (2.4GHz/5GHz)*

802.11a/n/ac (5GHz)

Specify the standard for the Wi-Fi network.

Wireless Security Mode

Disabled*

WEP

WPA2/WPA-Personal

WPA2-Personal

802.1x - RADIUS

Set the security mode for connecting the printer to Wi-Fi devices.

IPv4

Enable DHCP (On*)

Set Static IP Address

Configure the IPv4 settings.

IPv6

Enable IPv6 (On*)

Enable DHCPv6 (Off*)

Stateless Address Autoconfiguration (On*)

DNS Server Address

Manually Assigned IPv6 Address

Manually Assigned IPv6 Router

Address Prefix (64*)

All IPv6 Addresses

All IPv6 Router Addresses

Configure the IPv6 settings.

Network Address

Specify the network address.

PCL SmartSwitch

Off

On*

Set the printer to switch automatically to PCL emulation when a print job requires it, regardless of the default printer language.

Note: When this setting is disabled, the printer does not examine incoming data and uses the default printer language specified in the Setup menu.

PS SmartSwitch

Off

On*

Set the printer to switch automatically to PostScript emulation when a print job requires it, regardless of the default printer language.

Note: When this setting is disabled, the printer does not examine incoming data and uses the default printer language specified in the Setup menu.

Job Buffering

Off*

On

Temporarily store print jobs on the hard disk before printing.

Note: This menu item appears only when a hard disk is installed.

Mac Binary PS

Auto*

On

Off

Set the printer to process Macintosh binary PostScript print jobs.

Notes:

On processes raw binary PostScript print jobs.
Off filters print jobs using the standard protocol.

Ethernet

Menu item	Description
Note: An asterisk (*) next to a value indicates the factory default setting.
Network Speed	Show the speed of an active network adapter.
IPv4 Enable DHCP Off On*	Enable Dynamic Host Configuration Protocol (DHCP). Note: DHCP is a standard protocol that allows a server to distribute IP addressing and configuration information dynamically to clients.
IPv4 Set Static IP Address IP Address Netmask Gateway	Set the static IP address of your printer.
IPv6 Enable IPv6 Off On*	Enable IPv6 in the printer.
IPv6 Enable DHCPv6 Off* On	Enable DHCPv6 in the printer.
IPv6 Stateless Address Autoconfiguration Off On*	Set the network adapter to accept the automatic IPv6 address configuration entries provided by a router.
IPv6 DNS Server Address	Specify the DNS server address.
IPv6 Manually Assigned IPv6 Address	Assign the IPv6 address.
IPv6 Manually Assigned IPv6 Router	Assign the IPv6 address.
IPv6 Address Prefix 0–128 (64*)	Specify the address prefix.
IPv6 All IPv6 Addresses	Show all IPv6 addresses.
IPv6 All IPv6 Router Addresses	Show all IPv6 router addresses.
Network Address UAA LAA	Show the printer Media Access Control (MAC) addresses: Locally Administered Address (LAA) and Universally Administered Address (UAA). Note: You can change the printer LAA manually.
PCL SmartSwitch Off On*	Set the printer to switch automatically to PCL emulation when a print job requires it, regardless of the default printer language. Note: If PCL SmartSwitch is off, then the printer does not examine incoming data and uses the default printer language specified in the Setup menu.
PS SmartSwitch Off On*	Set the printer to switch automatically to PS emulation when a print job requires it, regardless of the default printer language. Note: If PS SmartSwitch is off, then the printer does not examine incoming data and uses the default printer language specified in the Setup menu.
Job Buffering Off On*	Temporarily store jobs on the printer hard disk before printing. Note: This menu item appears only when a hard disk is installed.
Mac Binary PS Auto* On Off	Set the printer to process Macintosh binary PostScript print jobs. Notes: On processes raw binary PostScript print jobs. Off filters print jobs using the standard protocol.
Energy Efficient Ethernet Off On*	Reduce power consumption when the printer does not receive data from the Ethernet network.

Menu item

Description

Network Speed

Show the speed of an active network adapter.

IPv4

Enable DHCP

Off

On*

Enable Dynamic Host Configuration Protocol (DHCP).

Note: DHCP is a standard protocol that allows a server to distribute IP addressing and configuration information dynamically to clients.

IPv4

Set Static IP Address

IP Address

Netmask

Gateway

Set the static IP address of your printer.

IPv6

Enable IPv6

Off

On*

Enable IPv6 in the printer.

IPv6

Enable DHCPv6

Off*

On

Enable DHCPv6 in the printer.

IPv6

Stateless Address Autoconfiguration

Off

On*

Set the network adapter to accept the automatic IPv6 address configuration entries provided by a router.

IPv6

DNS Server Address

Specify the DNS server address.

IPv6

Manually Assigned IPv6 Address

Assign the IPv6 address.

IPv6

Manually Assigned IPv6 Router

Assign the IPv6 address.

IPv6

Address Prefix

0–128 (64*)

Specify the address prefix.

IPv6

All IPv6 Addresses

Show all IPv6 addresses.

IPv6

All IPv6 Router Addresses

Show all IPv6 router addresses.

Network Address

UAA

LAA

Show the printer Media Access Control (MAC) addresses: Locally Administered Address (LAA) and Universally Administered Address (UAA).

Note: You can change the printer LAA manually.

PCL SmartSwitch

Off

On*

Set the printer to switch automatically to PCL emulation when a print job requires it, regardless of the default printer language.

Note: If PCL SmartSwitch is off, then the printer does not examine incoming data and uses the default printer language specified in the Setup menu.

PS SmartSwitch

Off

On*

Set the printer to switch automatically to PS emulation when a print job requires it, regardless of the default printer language.

Note: If PS SmartSwitch is off, then the printer does not examine incoming data and uses the default printer language specified in the Setup menu.

Job Buffering

Off

On*

Temporarily store jobs on the printer hard disk before printing.

Note: This menu item appears only when a hard disk is installed.

Mac Binary PS

Auto*

On

Off

Set the printer to process Macintosh binary PostScript print jobs.

Notes:

On processes raw binary PostScript print jobs.
Off filters print jobs using the standard protocol.

Energy Efficient Ethernet

Off

On*

Reduce power consumption when the printer does not receive data from the Ethernet network.

TCP/IP

Note: This menu appears only in network printers or printers attached to print servers.

Menu item	Description
Note: An asterisk (*) next to a value indicates the factory default setting.
Set Hostname	Set the current TCP/IP host name.
Domain Name	Set the domain name.
Allow DHCP/BOOTP to update NTP server On* Off	Allow the DHCP and BOOTP clients to update the NTP settings of the printer.
Zero Configuration Name	Specify a service name for the zero configuration network.
Enable Auto IP On* Off	Assign an IP address automatically.
DNS Server Address	Specify the current Domain Name System (DNS) server address.
Backup DNS Server Address	Specify the backup DNS server addresses.
Backup DNS Server Address 2
Backup DNS Server Address 3
Domain Search Order	Specify a list of domain names to locate the printer and its resources that reside in different domains on the network.
Enable DDNS Off* On	Update the Dynamic DNS settings.
DDNS TTL 300–31536000 seconds (3600*)	Specify the current DDNS settings.
Default TTL 5–254 seconds (254*)
DDNS Refresh Time 300–31536000 seconds (604800*)
Enable mDNS On* Off	Update multicast DNS settings.
WINS Server Address	Specify a server address for Windows Internet Name Service (WINS).
Enable BOOTP Off* On	Allow the BOOTP to assign a printer IP address.
Restricted Server List	Specify an IP address for the TCP connections. Notes: Use a comma to separate each IP address. You can add up to 50 IP addresses.
Restricted Server List Options Block All Ports* Block Printing Only Block Printing and HTTP Only	Specify how the IP addresses in the list can access the printer functionality.
MTU 256–1500 (1500*)	Specify a maximum transmission unit (MTU) parameter for the TCP connections.
Raw Print Port 1–65535 (9100*)	Specify a raw port number for printers connected on a network.
Outbound Traffic Maximum Speed Disabled* Enabled 100–1000000 (100000*)	Enable the printer maximum transfer rate.
Enable TLSv1.0 On* Off	Enable the TLSv1.0 protocol.
Enable TLSv1.1 On* Off	Enable the TLSv1.1 protocol.
SSL Cipher List	Specify the cipher algorithms to use for the SSL or the TLS connections.

Menu item

Description

Set Hostname

Set the current TCP/IP host name.

Domain Name

Set the domain name.

Allow DHCP/BOOTP to update NTP server

On*

Off

Allow the DHCP and BOOTP clients to update the NTP settings of the printer.

Zero Configuration Name

Specify a service name for the zero configuration network.

Enable Auto IP

On*

Off

Assign an IP address automatically.

DNS Server Address

Specify the current Domain Name System (DNS) server address.

Backup DNS Server Address

Specify the backup DNS server addresses.

Backup DNS Server Address 2

Backup DNS Server Address 3

Domain Search Order

Specify a list of domain names to locate the printer and its resources that reside in different domains on the network.

Enable DDNS

Off*

On

Update the Dynamic DNS settings.

DDNS TTL

300–31536000 seconds (3600*)

Specify the current DDNS settings.

Default TTL

5–254 seconds (254*)

DDNS Refresh Time

300–31536000 seconds (604800*)

Enable mDNS

On*

Off

Update multicast DNS settings.

WINS Server Address

Specify a server address for Windows Internet Name Service (WINS).

Enable BOOTP

Off*

On

Allow the BOOTP to assign a printer IP address.

Restricted Server List

Specify an IP address for the TCP connections.

Notes:

Use a comma to separate each IP address.
You can add up to 50 IP addresses.

Restricted Server List Options

Block All Ports*

Block Printing Only

Block Printing and HTTP Only

Specify how the IP addresses in the list can access the printer functionality.

MTU

256–1500 (1500*)

Specify a maximum transmission unit (MTU) parameter for the TCP connections.

Raw Print Port

1–65535 (9100*)

Specify a raw port number for printers connected on a network.

Outbound Traffic Maximum Speed

Disabled*

Enabled

100–1000000 (100000*)

Enable the printer maximum transfer rate.

Enable TLSv1.0

On*

Off

Enable the TLSv1.0 protocol.

Enable TLSv1.1

On*

Off

Enable the TLSv1.1 protocol.

SSL Cipher List

Specify the cipher algorithms to use for the SSL or the TLS connections.

SNMP

Note: This menu appears only in network printers or printers that are attached to print servers.

Menu item	Description
Note: An asterisk (*) next to a value indicates the factory default setting.
SNMP Versions 1 and 2c Enabled Off On* Allow SNMP Set Off On* Enable PPM MIB Off On* SNMP Community	Configure Simple Network Management Protocol (SNMP) versions 1 and 2c to install print drivers and applications.
SNMP Version 3 Enabled Off On* Context Name Set Read/Write Credentials User Name Authentication Password Privacy Password Set Read-only Credentials User Name Authentication Password Privacy Password Authentication Hash MD5 SHA1* Minimum Authentication Level No Authentication, No Privacy Authentication, No Privacy Authentication, Privacy* Privacy Algorithm DES AES-128*	Configure SNMP version 3 to install and update the printer security.

Menu item

Description

SNMP Versions 1 and 2c

Enabled

Off

On*

Allow SNMP Set

Off

On*

Enable PPM MIB

Off

On*

SNMP Community

Configure Simple Network Management Protocol (SNMP) versions 1 and 2c to install print drivers and applications.

SNMP Version 3

Enabled

Off

On*

Context Name

Set Read/Write Credentials

User Name

Authentication Password

Privacy Password

Set Read-only Credentials

User Name

Authentication Password

Privacy Password

Authentication Hash

MD5

SHA1*

Minimum Authentication Level

No Authentication, No Privacy

Authentication, No Privacy

Authentication, Privacy*

Privacy Algorithm

DES

AES-128*

Configure SNMP version 3 to install and update the printer security.

IPSec

Note: This menu appears only in network printers or printers that are attached to print servers.

Menu item	Description
Note: An asterisk (*) next to a value indicates the factory default setting.
Enable IPSec Off* On	Enable Internet Protocol Security (IPSec).
Base Configuration Default* Compatibility Secure	Set the IPSec base configuration. Note: This menu item appears only when Enable IPSec is set to On.
DH (Diffie-Hellman) Group Proposal modp2048 (14)* modp3072 (15) modp4096 (16) modp6144 (17)	Set the IPSec base configuration. Note: This menu item appears only when Base Configuration is set to Compatibility.
Proposed Encryption Method 3DES AES*	Set the encryption method. Note: This menu item appears only when Base Configuration is set to Compatibility.
Proposed Authentication Method SHA1 SHA256* SHA512	Set the authentication method. Note: This menu item appears only when Base Configuration is set to Compatibility.
IKE SA Lifetime (Hours) 1 2 4 8 24*	Specify the IKE SA expiry period. Note: This menu item appears only when Base Configuration is set to Secure.
IPSec SA Lifetime (Hours) 1 2 4 8* 24	Specify the IPSec SA expiry period. Note: This menu item appears only when Base Configuration is set to Secure.
IPSec Device Certificate	Specify an IPSec certificate. Note: This menu item appears only when Enable IPSec is set to On.
Pre-Shared Key Authenticated Connections Host [x]	Configure the authenticated connections of the printer. Note: These menu items appear only when Enable IPSec is set to On.
Certificate Authenticated Connections Host [x] Address[/subnet]

Menu item

Description

Enable IPSec

Off*

On

Enable Internet Protocol Security (IPSec).

Base Configuration

Default*

Compatibility

Secure

Set the IPSec base configuration.

Note: This menu item appears only when Enable IPSec is set to On.

DH (Diffie-Hellman) Group Proposal

modp2048 (14)*

modp3072 (15)

modp4096 (16)

modp6144 (17)

Set the IPSec base configuration.

Note: This menu item appears only when Base Configuration is set to Compatibility.

Proposed Encryption Method

3DES

AES*

Set the encryption method.

Note: This menu item appears only when Base Configuration is set to Compatibility.

Proposed Authentication Method

SHA1

SHA256*

SHA512

Set the authentication method.

Note: This menu item appears only when Base Configuration is set to Compatibility.

IKE SA Lifetime (Hours)

1

2

4

8

24*

Specify the IKE SA expiry period.

Note: This menu item appears only when Base Configuration is set to Secure.

IPSec SA Lifetime (Hours)

1

2

4

8*

24

Specify the IPSec SA expiry period.

Note: This menu item appears only when Base Configuration is set to Secure.

IPSec Device Certificate

Specify an IPSec certificate.

Note: This menu item appears only when Enable IPSec is set to On.

Pre-Shared Key Authenticated Connections

Host [x]

Configure the authenticated connections of the printer.

Note: These menu items appear only when Enable IPSec is set to On.

Certificate Authenticated Connections

Host [x] Address[/subnet]

Menu item	Description
Note: An asterisk (*) next to a value indicates the factory default setting.
Active Off* On	Let the printer join networks that require authentication before allowing access.

LPD Configuration

Note: This menu appears only in network printers or printers that are attached to print servers.

Menu item	Description
Note: An asterisk (*) next to a value indicates the factory default setting.
LPD Timeout 0–65535 seconds (90*)	Set the time-out value to stop the Line Printer Daemon (LPD) server from waiting indefinitely for hung or invalid print jobs.
LPD Banner Page Off* On	Print a banner page for all LPD print jobs. Note: A banner page is the first page of a print job used as a separator of print jobs and to identify the originator of the print job request.
LPD Trailer Page Off* On	Print a trailer page for all LPD print jobs. Note: A trailer page is the last page of a print job.
LPD Carriage Return Conversion Off* On	Enable carriage return conversion. Note: Carriage return is a mechanism that commands the printer to move the position of the cursor to the first position on the same line.

Menu item

Description

LPD Timeout

0–65535 seconds (90*)

Set the time-out value to stop the Line Printer Daemon (LPD) server from waiting indefinitely for hung or invalid print jobs.

LPD Banner Page

Off*

On

Print a banner page for all LPD print jobs.

Note: A banner page is the first page of a print job used as a separator of print jobs and to identify the originator of the print job request.

LPD Trailer Page

Off*

On

Print a trailer page for all LPD print jobs.

Note: A trailer page is the last page of a print job.

LPD Carriage Return Conversion

Off*

On

Enable carriage return conversion.

Note: Carriage return is a mechanism that commands the printer to move the position of the cursor to the first position on the same line.

HTTP/FTP Settings

Menu item	Description
Note: An asterisk (*) next to a value indicates the factory default setting.
Enable HTTP Server Off On*	Access the Embedded Web Server to monitor and manage the printer.
Enable HTTPS Off On*	Enable Hypertext Transfer Protocol Secure (HTTPS) to encrypt data transferring to and from the print server.
Force HTTPS Connections On Off*	Force the printer to use HTTPS connections.
Enable FTP/TFTP Off On*	Send files using FTP/TFTP.
Local Domains	Specify domain names for HTTP and FTP servers.
HTTP Proxy IP Address	Configure the HTTP and FTP server settings.
FTP Proxy IP Address
HTTP Default IP Port
HTTPS Device Certificate
FTP Default IP Port
Timeout for HTTP/FTP Requests 1–299 (30*)	Specify the amount of time before the server connection stops.
Retries for HTTP/FTP Requests 1–299 (3*)	Set the number of retries to connect to the HTTP/FTP server.

Menu item

Description

Enable HTTP Server

Off

On*

Access the Embedded Web Server to monitor and manage the printer.

Enable HTTPS

Off

On*

Enable Hypertext Transfer Protocol Secure (HTTPS) to encrypt data transferring to and from the print server.

Force HTTPS Connections

On

Off*

Force the printer to use HTTPS connections.

Enable FTP/TFTP

Off

On*

Send files using FTP/TFTP.

Local Domains

Specify domain names for HTTP and FTP servers.

HTTP Proxy IP Address

Configure the HTTP and FTP server settings.

FTP Proxy IP Address

HTTP Default IP Port

HTTPS Device Certificate

FTP Default IP Port

Timeout for HTTP/FTP Requests

1–299 (30*)

Specify the amount of time before the server connection stops.

Retries for HTTP/FTP Requests

1–299 (3*)

Set the number of retries to connect to the HTTP/FTP server.

USB

Menu item	Description
Note: An asterisk (*) next to a value indicates the factory default setting.
PCL SmartSwitch Off On*	Set the printer to switch to PCL emulation when a print job received through a USB port requires it, regardless of the default printer language. Note: When this setting is disabled, the printer does not examine incoming data and uses the default printer language specified in the Setup menu.
PS SmartSwitch Off On*	Set the printer to switch to PostScript emulation when a print job received through a USB port requires it, regardless of the default printer language. Note: When this setting is disabled, the printer does not examine incoming data and uses the default printer language specified in the Setup menu.
Job Buffering Off* On	Temporarily store jobs on the hard disk before printing. Note: This menu item appears only when a hard disk is installed.
Mac Binary PS Auto* On Off	Set the printer to process Macintosh binary PostScript print jobs. Notes: Auto processes print jobs from computers using either Windows or Macintosh operating systems. Off filters PostScript print jobs using the standard protocol.
Enable USB Port Off On*	Enable the front USB drive port.

Menu item

Description

PCL SmartSwitch

Off

On*

Set the printer to switch to PCL emulation when a print job received through a USB port requires it, regardless of the default printer language.

Note: When this setting is disabled, the printer does not examine incoming data and uses the default printer language specified in the Setup menu.

PS SmartSwitch

Off

On*

Set the printer to switch to PostScript emulation when a print job received through a USB port requires it, regardless of the default printer language.

Note: When this setting is disabled, the printer does not examine incoming data and uses the default printer language specified in the Setup menu.

Job Buffering

Off*

On

Temporarily store jobs on the hard disk before printing.

Note: This menu item appears only when a hard disk is installed.

Mac Binary PS

Auto*

On

Off

Set the printer to process Macintosh binary PostScript print jobs.

Notes:

Auto processes print jobs from computers using either Windows or Macintosh operating systems.
Off filters PostScript print jobs using the standard protocol.

Enable USB Port

Off

On*

Enable the front USB drive port.

Restrict external network access

Menu item	Description
Note: An asterisk (*) next to a value indicates the factory default setting.
Restrict external network access Off* On	Restrict access to network sites.
External network address	Specify the network addresses with restricted access.
E-mail address for notification	Specify an e-mail address to send a notification of logged events.
Ping frequency 1–300 (10*)	Specify the network query interval in seconds.
Subject	Specify the subject and message of the notification e-mail.
Message	Specify the subject and message of the notification e-mail.

Wi-Fi Direct

Note: This menu appears only when a direct Wi-Fi network is the active network.

Menu item	Description
Note: An asterisk (*) next to a value indicates the factory default setting.
SSID	Specify the service set identifier (SSID) of the Wi-Fi network.
Preferred Channel Number Auto 1–11 (6*)	Show the PSK on the Network Setup Page.
Set PSK	Set the preshared key (PSK) to authenticate and validate users on a Wi-Fi connection.
Show PSK on Setup Page Off On*	Show the PSK on the Network Setup Page.
Group Owner IP Address	Specify the IP address of the group owner.
Auto-Accept Push Button Requests Off* On	Accept requests to connect to the network automatically. Note: Accepting clients automatically is not secure.