Menu item |
Description |
---|---|
Note: An asterisk (*) next to a value indicates the factory default setting. |
|
Default Source
|
Set the paper source for all print jobs. Note: Multipurpose Feeder only appears when Configure MP is set to Cassette. |
Paper Size/Type
|
Specify the paper size or paper type loaded in each paper source. |
Substitute Size
|
Set the printer to substitute a specified paper size if the requested size is not loaded in any paper source. Notes:
|
Configure MP
|
Set the printer when to pick paper loaded in the multipurpose feeder. Notes:
|
Menu item |
Description |
---|---|
Note: An asterisk (*) next to a value indicates the factory default setting. |
|
Units of Measure
|
Specify the unit of measurement for the universal paper. Note: Inches is the U.S. factory default setting. Millimeters is the international factory default setting. |
Portrait Width
|
Set the portrait width of the universal paper. |
Portrait Height
|
Set the portrait height of the universal paper. |
Feed Direction
|
Set the printer to pick paper from the short edge or long edge direction. Note: Long Edge appears only when the longest edge is shorter than the maximum width supported. |
Menu item |
Description |
---|---|
Custom Scan Size [x]
|
Assign a scan size name and configure the scan settings. |
Menu item |
Description |
---|---|
Note: An asterisk (*) next to a value indicates the factory default setting. |
|
|
Specify the texture and weight of the paper loaded. Select from the following options:
|