Paper jam in trays

Paper jam light - On

Start button light - On

If the light sequence matches the light sequence in the preceding illustration, then press the start button twice to see the supplemental light sequence.

Light sequences

Paper jam light - On

Load paper light - On

Toner cartridge light - On

Start button light - On

Paper jam light - On

Load paper light - On

Ready light - On

Start button light - On


If the supplemental light sequence matches any of the light sequences in the preceding illustrations, then do the following.

  1. Remove the tray.

  2. Remove the jammed paper.

    Note: Make sure that all paper fragments are removed.

  3. Insert the tray.

  4. From the control panel, press the select button.