Ordering supplies

To order parts and supplies in the U.S., contact Lexmark at 1-800-539-6275 for information about Lexmark authorized supplies dealers in your area. In other countries or regions, go to the Lexmark Web site at www.lexmark.com or contact the place where you purchased the printer.

Using genuine Lexmark parts and supplies

Your Lexmark printer is designed to function best with genuine Lexmark supplies and parts. Use of third-party supplies or parts may affect the performance, reliability, or life of the printer and its imaging components. Use of third-party supplies or parts can affect warranty coverage. Damage caused by the use of third-party supplies or parts is not covered by the warranty. All life indicators are designed to function with Lexmark supplies and parts, and may deliver unpredictable results if third-party supplies or parts are used. Imaging component usage beyond the intended life may damage your Lexmark printer or its associated components.

Estimated number of remaining pages

The estimated number of remaining pages is based on the recent printing history of the printer. Its accuracy may vary significantly and is dependent on many factors, such as actual document content, print quality settings, and other printer settings.

The accuracy of the estimated number of remaining pages may decrease when the actual printing consumption is different from the historical printing consumption. Consider the variable level of accuracy before purchasing or replacing supplies based on the estimate. Until an adequate print history is obtained on the printer, the estimated cartridge yield is based on approximately 5% coverage per page.

Ordering toner cartridges

Notes:

Estimated cartridge yield is based on the ISO/IEC 19752 standard.
Extremely low print coverage for extended periods of time may negatively affect actual yield.

Item	Return Program cartridge
* This toner cartridge is supported only in the MS711 printer model. For more information on countries located in a region, visit www.lexmark.com/regions.
For the United States and Canada
High Yield Toner Cartridge	521HL
Extra High Yield Toner Cartridge	521XL*
For the European Union, European Economic Area , and Switzerland
High Yield Toner Cartridge	522HL
Extra High Yield Toner Cartridge	522XL*
For the Asia Pacific Region (includes Australia and New Zealand)
High Yield Toner Cartridge	523HL
Extra High Yield Toner Cartridge	523XL*
For Latin America (includes Puerto Rico and Mexico)
High Yield Toner Cartridge	524HL
Extra High Yield Toner Cartridge	524XL*
For Africa, Middle East, Central Eastern Europe, and Commonwealth of Independent States
High Yield Toner Cartridge	525HL
Extra High Yield Toner Cartridge	525XL*

Item	Regular cartridge
¹ This cartridge is supported only in the MS710 printer model. ² This cartridge is supported only in the MS711 printer model.
Worldwide
High Yield Toner Cartridge	520HAL¹
Extra High Yield Toner Cartridge	520XAL²

Ordering an imaging unit

Extremely low print coverage for extended periods of time may cause imaging unit parts to fail prior to exhaustion of toner.

For more information on replacing the imaging unit, see the instruction sheet that came with the supply.

Part name	Lexmark Return Program	Regular
Imaging unit	520Z	520ZA

Part name	Part number
Staple cartridges	25A0013

Part name	Part number
Oil wiper in bag	40x8579
Wax wiper in bag	40X8581

Ordering a maintenance kit

To identify the supported fuser type, view the label on the fuser. Do either of the following:

Remove the toner cartridge and the imaging unit. The two-digit fuser type code (such as 11 or 13) can be seen on the front of the fuser.

Warning—Potential Damage: Do not expose the imaging unit to direct light for more than 10 minutes. Extended exposure to light may cause print quality problems.
Pull down the printer rear door. The two-digit fuser type code (such as 11 or 13) can be seen on the rear of the fuser.

Notes:

Using certain types of paper may require more frequent replacement of the maintenance kit.
The separator roller, fuser, pick roller assembly, and transfer roller are all included in the maintenance kit and can be individually ordered and replaced if necessary.
For more information on replacing the parts included in the maintenance kit, see the instruction sheet that came with each part.

Lexmark Return Program fuser maintenance kit type
Type		Part number
MS710 Series Return Program fuser maintenance kit type 11, 110–120V		40X8530
MS710 Series Return Program fuser maintenance kit type 13, 220–240V		40X8531
MS710 Series Return Program fuser maintenance kit type 15, 100V		40X8532

Lexmark regular fuser maintenance kit type
Type		Part number
MS710 Series regular fuser maintenance kit type 17, 110–120V		40X8533
MS710 Series regular fuser maintenance kit type 19, 220–240V		40X8534
MS710 Series regular fuser maintenance kit type 21, 100V		40X8535

Lexmark roller kit
		Part number
MS710 Series roller kit		40X7706