Replacing a photoconductor unit

1. Open the bottom front door.

   

2. Remove the waste toner bottle.

   

3. Unlock the photoconductor unit.

   

4. Remove the photoconductor unit.

   

5. Unpack the new photoconductor unit.

   Warning—Potential Damage:  Do not expose the photoconductor unit to direct light for more than 10 minutes. Extended exposure to light may cause print quality problems.
   Warning—Potential Damage:  Do not touch the photoconductor drum. Doing so may affect the print quality of future print jobs.

6. Install the photoconductor unit.

   

7. Lock the photoconductor unit.

   

8. Reinstall the waste toner bottle.

   

9. Close the bottom front door.

Replacing the staple cartridge in the staple finisher

1. Press the latch on the staple finisher, and then slide the finisher to the left.

   

2. Remove the staple cartridge holder.

   

3. Remove the empty staple cartridge from the cartridge holder.

   

4. Insert the new cartridge into the cartridge holder.

   

5. Push the cartridge holder into the finisher until the holder clicks into place.

   

6. Slide the finisher back into place.

   

Replacing the staple cartridge in the booklet finisher

1. Open door H, and then pull out the booklet maker.

   

2. Remove the staple cartridge holder.

   

3. Remove the empty staple cartridge from the cartridge holder.

   

4. Insert the new cartridge into the cartridge holder.

   

5. Push the cartridge holder into the booklet maker until the holder clicks into place.

   

6. Push the booklet maker back into place, and then close the door.

Replacing the staple cartridge in the staple, hole punch finisher

1. Open door H.

   

2. Remove the staple cartridge holder.

   

3. Remove the empty staple cartridge from the cartridge holder.

   

4. Insert the new cartridge into the cartridge holder.

   

5. Push the cartridge holder into the finisher until the holder clicks into place.

   

6. Close door H.

Replacing the toner cartridge

1. Open the top front door.

   

2. Rotate the toner cartridge counterclockwise, and then pull it out.

   

3. Unpack the new toner cartridge, remove the packing material, and then shake the cartridge to redistribute the toner.

   

4. Insert the toner cartridge into the printer.

   

5. Rotate the cartridge clockwise to lock it into place.

   

6. Close the top front door.

   

7. Clean the charger and the printhead lens. For more information, see Cleaning the charger and the printhead lens .

Replacing the waste toner bottle

1. Open the bottom front door.

   

2. Remove the waste toner bottle.

   

3. Clean the charger and the printhead lens. For more information, see steps 3–7 of Cleaning the charger and the printhead lens .

4. Unpack the new waste toner bottle.

5. Insert the new waste toner bottle into the printer until it clicks into place.

   

6. Close the bottom front door.