Replacing supplies

Lift the front cover, and then pull down the multipurpose feeder door.
Pull the cartridge out of the printer using the handle.
Unpack the new toner cartridge, then remove the packing material, and then shake the cartridge to redistribute the toner.
Insert the toner cartridge into the printer by aligning the side rails of the cartridge with the arrows on the side rails inside the printer.
Note: Make sure the cartridge is fully pushed in.
Warning—Potential Damage: When replacing a toner cartridge, do not leave the imaging unit exposed to direct light for an extended period of time. Extended exposure to light may cause print quality problems.
Close the multipurpose feeder door and the front cover.

Lift the front cover, and then pull down the multipurpose feeder door.
Pull out the toner cartridge from the printer using the handle.
Lift the green handle, and then pull out the imaging unit from the printer.
Unpack the new imaging unit, and then shake it.
Remove all packing material from the imaging unit.
Warning—Potential Damage: Do not expose the imaging unit to direct light for more than 10 minutes. Extended exposure to light may cause print quality problems.
Warning—Potential Damage: Do not touch the photoconductor drum. Doing so may affect the print quality of future print jobs.
Insert the imaging unit into the printer by aligning the arrows on the side rails of the imaging unit with the arrows on the side rails inside the printer.
Insert the toner cartridge into the printer by aligning the side rails of the cartridge with the arrows on the side rails inside the printer.
Close the multipurpose feeder door and the front cover.