CAUTION—TIPPING HAZARD: Installing one or more options on your printer or MFP may require a caster base, furniture, or other feature to prevent instability causing possible injury. For more information on supported configurations, see www.lexmark.com/multifunctionprinters. CAUTION—TIPPING HAZARD: To reduce the risk of equipment instability, load each tray separately. Keep all other trays closed until needed.You can configure your printer by adding optional 550- or 2100-sheet trays. For more information, see Installing the 550-sheet tray or Installing the 2100-sheet tray.
1 | Automatic document feeder (ADF) tray |
2 | ADF bin |
3 | Standard bin |
4 | Multipurpose feeder |
5 | Standard 550-sheet tray |
6 | Control panel |
7 | ADF |
Hardware option | Alternative hardware option | |
|---|---|---|
1 | 4-bin mailbox |
|
2 | 2100-sheet tray | 550-sheet trays |
3 | Caster base | Caster base |
4 | 550-sheet trays | 2100-sheet tray |
5 | Staple finisher |
|
When using optional trays:
Always use a caster base when the printer is configured with a 2100-sheet tray.
The 2100-sheet tray must always be at the bottom of a configuration.
If the 2100-sheet tray is installed, then you cannot use an optional 550-sheet tray.
A maximum of two optional trays may be configured with the printer.
The printer supports only one finisher at a time.