„Lexmark“ spausdintuvai ir daugiafunkciai spausdintuvai C4150, CS720, CS725, CS727, CS728, CX725, CX727, XC4140, XC4143, XC4150, XC4153

Toliau pateiktose lentelėse pateikiama informacija apie standartinius ir papildomus popieriaus šaltinius bei jiems tinkamus popieriaus formatus, rūšis ir svorius.

Pastaba: Jei sąraše nėra pageidaujamo popieriaus formato, pasirinkite arčiausiai sąraše esantį didesnį formatą.

Supported paper sizes

Paper size	Dimensions	550-sheet tray	Two-sided printing	ADF
^* This paper source does not support automatic size sensing.
A4	210 x 297 mm (8.3 x 11.7 in.)
A5 long edge	210 x 148 mm (8.3 x 5.8 in.)			X
A5 short edge	148 x 210 mm (5.8 x 8.3 in.)
A6	105 x 148 mm (4.1 x 5.8 in.)
Banner	Max width: 215.9 mm (8.5 in.) Max length: 1320.8 mm (52 in.)	X	X	X
Executive	184.2 x 266.7 mm (7.3 x 10.5 in.)
Folio	215.9 x 330.2 mm (8.5 x 13 in.)
JIS B5	182 x 257 mm (7.2 x 10.1 in.)
Legal	215.9 x 355.6 mm (8.5 x 14 in.)
Letter	215.9 x 279.4 mm (8.5 x 11 in.)
Oficio	215.9 x 340 mm (8.5 x 13.4 in.)
Statement	139.7 x 215.9 mm (5.5 x 8.5 in.)
Universal	105 x 148 mm to 215.9 x 355.6 mm (4.13 x 5.83 in. to 8.5 x 14 in.)			X
Universal	76.2 x 127 mm to 215.9 x 355.6 mm (3 x 5 in. to 8.5 x 14 in.)	X	X	X
7 3/4 Envelope	98.4 x 190.5 mm (3.9 x 7.5 in.)	X	X	X
9 Envelope	98.4 x 225.4 mm (3.86 x 8.9 in.)	X	X	X
10 Envelope	104.8 x 241.3 mm (4.1 x 9.5 in.)		X	X
B5 Envelope	176 x 250 mm (6.9 x 9.8 in.)		X	X
C5 Envelope	162 x 229 mm (6.4 x 9 in.)		X	X
DL Envelope	110 x 220 mm (4.3 x 8.7 in.)		X	X
Monarch	98.4 x 190.5 mm (3.9 x 7.5 in.)	X	X	X
Other Envelope	98.4 x 162 mm to 176 x 250 mm (3.87 x 6.38 in. to 6.93 x 9.84 in.)	X	X	X

Palaikomos popieriaus rūšys

Pastaba: Etiketės, vokai ir kartoninis popierius visada spausdinami mažesne sparta.

Popieriaus rūšis	550 lapų dėklas	Daugiafunkcis tiektuvas	ADT
Paprastas popierius („Plain Paper“)
Kartoninis popierius („Card Stock“)			X
Perdirbtas popierius („Recycled“)
Blizgus popierius („Glossy“)			X
Sunkus blizgus popierius („Heavy Glossy“)			X
Etiketės („Labels“)			X
Vinilinės etiketės („Vinyl Labels“)			X
Standus popierius („Bond“)
Vokai („Envelope“)			X
Šiurkštūs vokai („Rough Envelope“)			X
Permatomos laikmenos („Transparency“)	X	X	X
Firminiai blankai („Letterhead“)
Iš anksto paruoštos formos („Preprinted“)
Spalvotas popierius („Colored“)
Lengvas popierius („Light“)
Sunkus popierius („Heavy“)
Tinkinta rūšis

Palaikomi popieriaus svoriai

Popieriaus rūšis	Popieriaus svoris
Paprastas popierius („Plain Paper“)	75–90,3 g/m ² (20–24 sv.)
Blizgus popierius („Glossy“)	88–176 g/m ² (60–120 sv. knyga)
Blizgus popierius („Glossy“)	162–176 g/m ² ilgo pluošto popierius (60–65 sv. viršelis)
Sunkus popierius	90,3–105 g/m ² ilgo pluošto popierius (24,1–28-sv.)
Kartoninis popierius	Iki 199 g/m ² ilgo pluošto popierius (110 sv.)
Kartoninis popierius	Iki 218 g/m ² trumpo pluošto popierius (80 sv.)
Etiketės (popierinės etiketės)	218 g/m ² (58 sv.)
Etiketės (vinilinės etiketės)	300 g/m ² (79,9 sv.)
Vokai	60–105 g/m ² (16–28 sv. įrišimas)

Tray fill line information

Depending on construction, paper labels and card stock can sometimes be difficult to pick and feed reliably. Performance can be improved by controlling the number of sheets of media loaded in the tray. There are two fill lines in the tray. The solid line is the maximum paper fill indicator. No media should be loaded in the tray above this line or paper jams could occur. The dashed line is the alternate paper fill indicator. It should be used if any feed or reliability issues are noted with specialty media, including labels and card stock. If paper jams occur when completely filling the tray, load the specialty media only up to the alternate paper fill indicator.

Supported card stock

Paper type	Grain direction	Paper weight
Index Bristol	Grain long	199 g/m ² (110 lb)
Index Bristol	Grain short	199 g/m ² (110 lb)
Tag	Grain long	163 g/m ² (100 lb)
Tag	Grain short	203 g/m ² (125 lb)
Cover	Grain long	176 g/m ² (65 lb)
Cover	Grain short	218 g/m ² (80 lb)

Supported labels

Label type	Width and length	Weight	Thickness	Smoothness
^* The minimum size for labels supported in the multipurpose feeder is 76 x 124 mm (3 x 5 in.). The minimum size for labels supported in the standard and optional trays is 148 x 210 mm (5.8 x 8.3 in.). ^† 50 Sheffield is optimal. Using media higher than 300 Sheffield could result in print quality degradation. Pastaba: Limit label printing to occasional use only, approximately 1500 labels per month.
Paper	76 x 216 mm (3 x 8.5 in.) ^*	218 g/m ² (58 lb)	0.13-0.20 mm (0.005-0.0008 in.)	50-300 Sheffield ^†
Vinyl	300 g/m ² (79.9 lb)

Label type

Width and length

Weight

Thickness

Smoothness

^* The minimum size for labels supported in the multipurpose feeder is 76 x 124 mm (3 x 5 in.). The minimum size for labels supported in the standard and optional trays is 148 x 210 mm (5.8 x 8.3 in.).

^† 50 Sheffield is optimal. Using media higher than 300 Sheffield could result in print quality degradation.

Pastaba: Limit label printing to occasional use only, approximately 1500 labels per month.

Paper

76 x 216 mm (3 x 8.5 in.) ^*

218 g/m ² (58 lb)

0.13-0.20 mm (0.005-0.0008 in.)

50-300 Sheffield ^†

Vinyl

300 g/m ² (79.9 lb)

Letterhead orientation

Source	Printing	Printed side	Paper orientation
Trays	One-sided	Faceup	Load paper with the top edge toward the front of the tray.
Trays	Two-sided	Facedown	Load paper with the top edge toward the back of the tray.
Multipurpose feeder	One-sided	Facedown	Load paper with the top edge entering the printer first.
Multipurpose feeder	Two-sided	Faceup	Load paper with the top edge entering the printer last.