The Universal Paper Size is a user-defined setting that lets you print on paper sizes that are not preset in the printer menus. Set the Paper Size for the specified tray to Universal when the size you want is not available from the Paper Size menu. Then, specify all of the following Universal size settings for your paper:
Units of measure (millimeters or inches)
Portrait Width
Portrait Height
Feed Direction
| Note: The smallest supported Universal size is 70 x 127 mm (2.8 x 5 in.); the largest is 216 x 356 mm (8.5 x 14 in.). |
Make sure the printer is on and appears.
From the printer control panel, press 
.
Press the arrow buttons until 
appears, and then press 
.
Press the arrow buttons until appears, and then press .
Press the arrow buttons until appears, and then press .
Press the arrow buttons until appears next to the correct unit of measure, and then press .
appears, followed by the menu.
Defining a specific height and width measurement for the Universal paper size (in the portrait orientation) allows the printer to support the size, including support for standard features such as duplex printing and printing multiple pages on one sheet.
From the Universal Setup menu, press the arrow buttons until appears, and then press .
Press the arrow buttons to change the paper width setting, and then press .
appears, followed by the menu.
Press the arrow buttons until appears, and then press .
Press the arrow buttons to change the paper height setting, and then press .
appears, followed by the menu.