Printing information pages

Printing a font sample list

To print samples of the fonts currently available for your printer:

  1. Make sure the printer is on and Ready appears.

  2. From the printer control panel, press menu button.

  3. Press the arrow buttons until checkmarkReports appears, and then press select button.

  4. Press the arrow buttons until checkmarkPrint Fonts appears, and then press select button.

  5. Press the arrow buttons until checkmark appears next to PCL Fonts, PostScript Fonts, or PPDS Fonts, and then press select button.

Printing a directory list

A directory list shows the resources stored in flash memory or on the hard disk.

  1. Make sure the printer is on and Ready appears.

  2. From the printer control panel, press menu button.

  3. Press the arrow buttons until checkmark Reports appears, and then press select button.

  4. Press the arrow buttons until checkmark Print Directory appears, and then press select button.

Printing the print quality test pages

Print the print quality test pages to isolate print quality problems.

  1. Turn the printer off.

  2. Hold down select button and right arrow button while turning the printer on.

  3. Release the buttons when the clock appears, and wait for CONFIG MENU to appear.

  4. Press the arrow buttons until checkmarkPrt Quality Pgs appears, and then press select button.

    The print quality test pages print.

  5. Press the arrow buttons until checkmarkExit Config Menu appears, and then press select button.

    Resetting the Printer appears briefly, followed by a clock, and then Ready appears.