Making copies

Making a quick copy

  1. Load an original document faceup, short edge first into the ADF tray or facedown on the scanner glass.

    Notes:

    • Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine clippings) into the ADF tray. Place these items on the scanner glass.
    • The ADF indicator light comes on when the paper is loaded properly.

  2. If you are loading a document into the ADF tray, then adjust the paper guides.

    Note: To avoid a cropped image, make sure the size of the original document and the size of the copy paper are the same.

  3. From the printer control panel, press the submit button.

Copying using the ADF

  1. Load an original document faceup, short edge first into the ADF tray.

    Notes:

    • Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine clippings) into the ADF tray. Place these items on the scanner glass.
    • The ADF indicator light comes on when the paper is loaded properly.

  2. Adjust the paper guides.

  3. From the printer control panel, use the keypad to enter the number of copies, and then press the submit button.

Copying using the scanner glass

  1. Place an original document facedown on the scanner glass in the upper left corner.

  2. From the printer control panel, use the keypad to enter the number of copies, and then press the submit button.

    Note: If you want to scan another document, then place the next document on the scanner glass, press the left or right arrow button to scroll to Scan the Next Page, and then press the select buttton.

  3. Press the left or right arrow button to scroll to Finish the Job, and then press the select buttton.