Export Log

Let an authorized user export the audit log.

Notes:

• To export the audit log from the printer control panel, a flash drive must be attached to the printer.
• The audit log can be downloaded from the Embedded Web Server and saved on a computer.

Delete Log

Yes

No

Specify whether or not audit logs are deleted.

Note: Yes is the factory default setting.

Configure Log

Enable Audit

Yes

No

Enable Remote Syslog

No

Yes

Remote Syslog Facility

0–23

Severity of events to log

0–7

Specify how and whether or not audit logs are created.

Notes:

• Enable Audit determines if events are recorded in the secure audit log and remote syslog. No is the factory default setting.
• Enable Remote Syslog determines if logs are sent to a remote server. No is the factory default setting.
• Remote Syslog Facility determines the value used to send logs to the remote syslog server. 4 is the factory default setting.
• If the security audit log is activated, then the severity value of each event is recorded. 4 is the factory default setting.

Current Date and Time

View the current date and time settings for the printer.

Manually Set Date and Time

[input date/time]

Enter the date and time.

Notes:

• Manually setting the date and time sets Enable NTP to No.
• The wizard lets you set the date and time in YYYY-MM-DD-HH:MM format.

Time Zone

[list of time zones]

Select the time zone.

Note: GMT is the factory default settings.

Automatically observe DST

On

Off

Set the printer to use the applicable daylight saving time (DST) start and end times associated with the printer Time Zone setting.

Note: On is the factory default setting.

Enable NTP

On

Off

Enable Network Time Protocol, which synchronizes the clocks of devices on a network.

Notes:

• On is the factory default setting.
• This setting is turned off if you manually set the date and time.