Replacing supplies

Press the button on the right side of the printer, and then open the front door.
Pull the toner cartridge out using the handle.
Unpack the toner cartridge, and then remove all packing materials.
Shake the new cartridge to redistribute the toner.
Insert the toner cartridge into the printer by aligning the side rails of the cartridge with the arrows on the side rails inside the printer.
Warning—Potential Damage: Do not expose the imaging unit to direct light for more than 10 minutes. Extended exposure to light may cause print quality problems.
Close the front door.

Press the button on the right side of the printer, and then open the front door.
Pull the toner cartridge out using the handle.
Lift the green handle, and then pull the imaging unit out of the printer.
Unpack the new imaging unit, and then shake it.
Remove all packing materials from the imaging unit.
Warning—Potential Damage: Do not expose the imaging unit to direct light for more than 10 minutes. Extended exposure to light may cause print quality problems.
Warning—Potential Damage: Do not touch the photoconductor drum. Doing so may affect the print quality of future print jobs.
Insert the imaging unit into the printer by aligning the arrows on the side rails of the imaging unit with the arrows on the side rails inside the printer.
Insert the toner cartridge into the printer by aligning the side rails of the cartridge with the arrows on the side rails inside the printer.
Close the front door.

Open the stapler door.
Pull out the staple cartridge from the finisher.
Hold both sides of the empty staple case with your fingers, pull, and then lift the empty staple case from the cartridge.
Remove the spare staple case from its holder.
Insert the spare staple case into the staple cartridge.
Push the staple cartridge into the finisher until it clicks into place.
Replace the spare staple case for future use.
Close the stapler door.