LEXMARK CARD AUTHENTICATION Readme for version 2.12.4 1. OVERVIEW This Readme file pertains to the current release of the LEXMARK CARD AUTHENTICATION application. Lexmark Card Authentication is an embedded solution that can be installed on printers that support the Lexmark Embedded Solutions Framework (eSF) v4.x, v3.x, or v2.x. Card Authentication locks out the printer until a user authenticates with a badge. It secures access to the printer using a user-defined security server or another printer as a server. 2. ASSOCIATED FILES The following files and publications are included in the release. a. Application file * cardAuth_e2-4.fls * Lexmark Card Authentication application for eSF v4.x, v3.x, and v2.x printers b. Other files * cardAuth_e2-4_desc.xml * The descriptor file for the application c. Publications * Card Authentication Administrator's Guide.pdf * The Administrator's Guide * Readme * (This file) 3. REQUIREMENTS a. A printer that supports eSF v2.x or higher applications. Supported eSF v4.x printers include: * CS510, CS517de * Required firmware level: LW30.VY4.P328 or later * CX510, CX517de * Required firmware level: LW30.GM7.P328 or later * MS610, MS617dn * Required firmware level: LW30.PR4.P328 or later * MS810, MS817n, MS817dn * Required firmware level: LW30.DN4.P328 or later * MS812 * Required firmware level: LW30.DN7.P328 or later * MS911 * Required firmware level: LF.SA.P039 or later * MX51x * Required firmware level: LW30.SB4.P328 or later * MX61x * Required firmware level: LW30.SB7.P328 or later * MX6500e * Required firmware level: LW30.JD.P328 or later * MX71x * Required firmware level: LW30.TU.P328 or later * MX81x * Required firmware level: LW30.TU.P328 or later * MX91x * Required firmware level: LF.MG.P039 or later Supported eSF v3.x printers include: * C748 * Required firmware level: LHS30.CM4.P303 or later * C792 * Required firmware level: LHS30.HC.P303 or later * C925 * Required firmware level: LHS30.HV.P303 or later * C950 * Required firmware level: LHS30.TP.P303 or later * X54x * Required firmware level: LHS30.VK.P303 or later * X74x * Required firmware level: LHS30.NY.P303 or later * X79x * Required firmware level: LHS30.MR.P303 or later * X92x * Required firmware level: LHS30.HK.P303 or later * X95x * Required firmware level: LHS30.TQ.P303 or later * 6500e * Required firmware level: LHS30.JR.P303 or later Supported eSF v2.x printers include: * T656 * Required firmware level: LSJ.SJ.P019S1 or later * X46x * Required firmware level: LR.BS.P631 or later * X65x * Required firmware level: LR.MN.P631a or later * X73x * Required firmware level: LR.FL.P631 or later * X86x * Required firmware level: LP.SP.P631 or later b. Memory: The printer must have a minimum of 256MB of RAM. c. License: This application requires an electronic license. To obtain a license, go to www.lexmark.com, and then click "Contact Us" at the bottom of the page. d. Card reader and driver: This application requires a card reader and an appropriate driver for card login. To obtain these items, go to www.lexmark.com, and then click "Contact Us" at the bottom of the page. 4. LIMITATIONS AND COMPATIBILITY OF THE RELEASE a. The card reader and driver are sold separately. To purchase the card reader, go to www.lexmark.com, and then click "Contact Us" at the bottom of the page. b. The card reader and driver do not support MX410 and CX410. c. Users must register with a badge through a card reader to use a printer. If a different card reader model is used, then it may not recognize the badge. Either use the same card reader model, or register the card again when prompted. d. If any authentication applications except Smart Card (for example, PKI, Cloud Authentication Client, and so on) and idle profile applications (for example, Background and Idle Screen, HD Monitor, Showroom, and so on) are installed before Card Authentication is installed, then these applications may not run. Uninstall existing authentication and idle profile applications before installing Card Authentication. See the Administrator’s Guide. e. The maximum number of client printers that can be registered is 23. f. Logging in to a printer using Card Authentication is not needed to perform host-based printing. g. Login Screen Text is limited to 256 characters. Text that is more than 256 characters does not show properly on the screen. h. Validating a badge in the backup or client is not possible while the master is updating firmware. Either wait until the master printer reboots, or wait until the update is completed. i. When the user is logged in and Session Access Control is set and Use Home Screen Logout is enabled, if the user removes the card reader, then the user cannot log out using the Log Out button from the home screen. Either attach the card reader or wait for the device to time out. j. When Smart Card Authentication is used, Manual Access Control must be set to Smart Card Authentication Client and Card Validation must be set to None. See the Administrator’s Guide. k. Use only one card reader. 5. RELEASE NOTES * 508 Accessibility Support * Serverless Client Registration Support for LPM Premise Environment * Bug fixes. For more information on installation and configuration instructions, see the Lexmark Card Authentication Administrator's Guide provided with the application. Adobe Acrobat Reader is required to view this guide.