LEXMARK CLOUD CONNECTOR Readme for version 1.3 1. OVERVIEW This Readme file pertains to the current release of the LEXMARK CLOUD CONNECTOR application. Lexmark Cloud Connector is an embedded solution that can be installed on printers that support the Lexmark Embedded Solutions Framework (eSF) v6.x or higher. It lets users upload and print files directly from a variety of cloud storage providers. 2. ASSOCIATED FILES The following files and publications are included in the release. a. Application files * cca_main_e6.fls * The Cloud Connector application for eSF v6.x or higher printers b. Other files * cca_main_e6_desc.xml * The Cloud Connector descriptor file for eSF v6.x or higher printers c. Publications * Lexmark Cloud Connector User’s Guide * The User's Guide * Readme * (This file) 3. REQUIREMENTS a. A printer that supports eSF v6.x or higher applications. Supported eSF v6.x or higher printers include: * CS522 * Required firmware level: CSTZJ.050.031 or later * CS725 * Required firmware level: CSTAT.050.031 or later * CS820 * Required firmware level: CSTPP.050.031 or later * CS92x * Required firmware level: CSTMH.050.031 or later * CX421 * Required firmware level: CXTZJ.050.031 or later * CX522 * Required firmware level: CXTZJ.050.031 or later * CX725 * Required firmware level: CXTAT.050.031 or later * CX820 * Required firmware level: CXTPP.050.031 or later * CX825/CX860 * Required firmware level: CXTPP.050.031 or later * CX92x * Required firmware level: CXTMH.050.031 or later * MS82x * Required firmware level: MSTGW.050.031 or later * MX42x * Required firmware level: MXTGM.050.031 or later * MX52x * Required firmware level: MXTGM.050.031 or later * MX62x * Required firmware level: MXTGM.050.031 or later * MX72x * Required firmware level: MXTGW.050.031 or later * MX82x * Required firmware level: MXTGW.050.031 or later b. Memory: The printer must have a minimum of 1GB RAM. c. Supported browsers when accessing the configuration page are Google Chrome v43.x.x.x and Internet Explorer 11.x.x. For Internet Explorer, we recommend to turn off the compatibility settings. 4. LIMITATIONS AND COMPATIBILITY OF RELEASE a. If the home button is pressed while scanning, the job is canceled, and no message appears. b. Scanning to Box using a duplicate file name is not supported. c. Depending on the set time, sleep mode may be activated while a print or scan job is ongoing. d. If the device proxy is changed, then the application icon may take a few minutes to appear during installation. e. Scan settings are based on default firmware settings for e-mail. f. Print settings are based on default firmware settings for USB drive. g. Pressing the home, cancel, or back button while printing or scanning cancels the job. h. Sending e-mails when SSL is enabled is not supported. i. A OneDrive account may be accessible after logging out. The application may take a few minutes for the logout to complete. j. For e-mail instructions to reach the inbox successfully, set the printer reply-to address to an e-mail associated in the e-mail server domain. 5. RELEASE NOTES * Added support for scan shortcuts. * UI enhancements. * Bug fixes. For more information on installation and configuration, see the Lexmark Cloud Connector User's Guide at support.lexmark.com. Adobe Acrobat Reader is required to view this guide.