Click the Services tab.
Select Email from the Services list.
Select Parameters from the Tasks list.
Type the password and user ID used to log on to your SMTP server.
Type the e-mail server connection timeout in seconds. The default is 60.
Type the e-mail server host name or IP address.
Enter the e-mail server I/O timeout in seconds.
Click Apply.
Though the default port is usually used for NPA device communication, the timeout periods between retries can be changed to improve reliability during device discovery.
Click the Services tab.
Select NPA from the Services list.
Select Parameters from the Tasks list.
Type the port number used for NPA on your network in the Unsecure Port field. The default setting is 9300.
Type a timeout period in milliseconds for each retry in sequence, separating each by a space in the NPANT Timeout field. The default settings are 1000 and 5000.
Click Apply.
Click the Services tab.
Select SNMP from the Services list.
Select Parameters from the Tasks list.
In the Port field, type the port number used for SNMP on your network. The default is 161.
In the Write Community Name field, type the write community string for printers on your network.
In the Timeouts/Retries field, type a timeout period in milliseconds for each retry in sequence, separating each by a space.
In the Read Community Name field, type the read community string for printers on your network.
Click Apply.
To enable communication with Basic Security template–enabled devices, make sure the Basic Security template matches the authentication type and the password or PIN configured in LMC. Only authentication through password or PIN is supported.
Click the Services tab.
Select DeviceSecurity from the Services list.
Select Parameters from the Tasks list.
Select the type of authentication for the device, and then type the password or PIN.
Click Apply.