If a hybrid solution is installed, and an associated eSF application includes a descriptor file, then you can edit the eSF application settings for e-Task 2+, e-Task 3, e-Task 4, and e-Task 5 printers. Each device group contains separate settings for any eSF applications, much like local solution settings.
| Note: LDD can only manage eSF application settings for e-Task 2+, e-Task 3, e-Task 4, and e-Task 5 printers. You must configure eSF application settings for e-Task 2 and X642 printers using the Embedded Web Server on each printer after the application is deployed. |
Click the Device Groups tab.
Select a device group from the Device Groups list.
Select eSF Configuration from the Tasks list.
Select an eSF application from the list in the main section.
Select the Verify eSF application deployment and deploy these eSF settings check box.
Select an e-Task printer in the Deploy to section.
| Note: If you are configuring advancedprompt, then make sure to select ALL to install Advanced Prompting Bundle in all printers running the LDD solution. |
Configure the settings of the eSF application for the current device group, and then click Save Settings.
| Note: A policy update is required after changing eSF application settings for a device group. For more information see Updating policies for device groups. |