Validation that occurs during deployment of eSF applications causes policy updates that include eSF deployments to take significantly longer than those that do not. If you do not want to validate eSF application deployment on each printer, then do the following:
| Note: eSF settings configured using the eSF configuration task are not deployed when validation of eSF application deployment is disabled. |
Click the Device Groups tab.
Select an appropriate device group from the list.
Select the eSF Configuration task.
Clear the Verify eSF application deployment and deploy these eSF settings check box, and then click Save Settings.
Repeat steps 2 through 4 for any other appropriate device groups.