If a hybrid solution is installed, and an associated eSF application includes a descriptor file, then you can edit the eSF application settings. This option applies to e-Task 5, e-Task 4, e-Task 3, and e-Task 2+ printers. Each device group contains separate settings for any eSF applications, which are similar to local solution settings.
| Note: LDD can manage eSF application settings only for e-Task 5, e-Task 4, e-Task 3, and e-Task 2+ printers. For e-Task 2 and X642 printers, configure the eSF application settings using the Embedded Web Server on each printer after the application is deployed. |
Click the Device Groups tab.
From the Device Groups list, select a device group.
From the Tasks list, select eSF Configuration.
In the main section, select an eSF application.
Select Verify eSF application deployment and deploy these eSF settings.
In the “Deploy to” section, select an e-Task printer.
| Note: If you are configuring advanced prompt, then make sure to select ALL to install the AP Bundle in all printers running the LDD solution. |
Configure the settings.
Click Save Settings.
| Note: A policy update is required after changing the eSF application settings for a device group. For more information, see Updating policies for device groups. |