Configuring the print queue

Note: To encrypt your print jobs securely, install UPD version 3.0.

From your computer, run the UPD administrator installer.

Note: Download UPD from http://lexmark.com .
When prompted for the installation type, select Extract , and then clear Start the installation software .
Browse to the location of the extracted UPD files.

Note: We recommend extracting files to the root of the C:\ drive or a directory off the C:\ drive.
Click Add a printer using TCP/IP address or host name , and then click Next .
Enter the following information:
1. Device type —Select the device type.
2. Hostname or IP address —Type the client IP address or host name.
3. Port name —Type the name of the port.
  
  Note: Query the printer and automatically select the driver to use is selected by default.
From the Device type menu, click Standard , and then select Generic Network Card .
Click Next .
When prompted to select a printer, select Have Disk , and then browse to the <extract_path> \InstallationPackage\Drivers\Print\GDI\ folder, where <extract_path> is the location of the extracted UPD files.

Note: We recommend extracting files to the root of the C:\ drive or a directory off the C:\ drive.
Run any of the .inf files.
Type a descriptive printer name, and click Next .
Right-click the new print queue, and then select Printer properties .
Accept the certificate.
From the Printer properties window, click Encryption tab.
Select Always encrypt , to encrypt print jobs.
Click Apply .
Click the Sharing tab, and then click Additional Drivers .
Select the necessary alternative print drivers, and then click OK .

Note: When using a 64-bit server, the most common alternative print driver is x86 Type 3 User Mode.
When prompted for the x86 processor, browse to the <extract_path> \InstallationPackage\Drivers\Print\GDI\ folder, where <extract_path> is the location of the extracted UPD files.
Run any of the .inf files.
When prompted for the print processor file, browse to the <extract_path> \InstallationPackage\Drivers\Print\GDI\i386 folder, where <extract_path> is the location of the extracted UPD files.
Run the ntprint.inf file.
Click OK .