Configuring an eSF application associated with a solution

If a hybrid solution is installed and an associated eSF application includes a descriptor file, then you can edit the eSF application settings. This option applies to e-Task 5, e-Task 4, e-Task 3, and e-Task 2+ printers. Each device group contains separate settings for any eSF application.

Note: LDD can manage eSF application settings for e-Task 5, e-Task 4, e-Task 3, and e-Task 2+ printers only. For e-Task 2 and X642 printers, configure the eSF application settings by using the Embedded Web Server on each printer after the application is deployed.

From LMC, click the Device Groups tab.
From the Device Groups section, select a device group.
From the Tasks section, select eSF Configuration .
From the main section, select an eSF application.
Select Verify eSF application deployment and deploy these eSF settings .
From the “Deploy to” section, select an e-Task printer.

Note: If you are configuring advanced prompt, then select All to install the AP Bundle in all printers running the LDD solution.
Configure the settings.
Click Save Settings .
Perform a policy update. For more information, see Updating policies for device groups .