Installing client software with secure print support

On a client computer or print server, do the following:

1. From the LDD installation package, run Setup.exe .

2. Select a language for the installation, and then click OK .

3. From the LDD Setup window, click Next .

4. Select Install LDD system components , and then click Next .

5. Accept the license agreement, and then click Next .

6. From the list of components, select Client Software , and click Next .

   Note:  Do not install the Microsoft Windows application software Select’N’Send on a print server.

7. From the Device Support Update window, click Next .

8. Specify a location for the installation, and then click Next .

9. From the Select Client Software window, select Client Software with Secure Print Support .

10. In the Loadbalancer IP/Hostname field, type the IP address or the host name of the server.

11. From the Profile Name menu, select the client profile.

    Notes:

    • The Profile Name menu lists all the fetched client software profiles.
    • If no client software profiles are fetched, then type the name of the profile. In this scenario, the default name is PrintSubmit.

12. From the Secured Print Settings section, do the following:

    1. Select Enable Secured Print Support .

    2. Select Allow Unencrypted print job submission .

13. Review the setup information, and then click Next .

14. Click Install .

15. Click Finish .