From your computer, run the UPD administrator installer.
When prompted for the installation type, select Extract, and then clear Start the installation software.
Browse to the location of the extracted UPD files.
Click Add a printer using TCP/IP address or host name, and then click Next.
Enter the following information:
Device type—Select the device type.
Hostname or IP address—Type the client IP address or host name.
Port name—Type the name of the port.
From the Device type menu, click Standard, and then select Generic Network Card.
Click Next.
When prompted to select a printer, select Have Disk, and then browse to the <extract_path>\InstallationPackage\Drivers\Print\GDI\ folder, where <extract_path> is the location of the extracted UPD files.
Run any of the .inf files.
Type a descriptive printer name, and click Next.
Right-click the new print queue, and then select Printer properties.
Accept the certificate.
From the Printer properties window, click Encryption tab.
Select Always encrypt, to encrypt print jobs.
Click Apply.
Click the Sharing tab, and then click Additional Drivers.
Select the necessary alternative print drivers, and then click OK.
When prompted for the x86 processor, browse to the <extract_path>\InstallationPackage\Drivers\Print\GDI\ folder, where <extract_path> is the location of the extracted UPD files.
Run any of the .inf files.
When prompted for the print processor file, browse to the <extract_path>\InstallationPackage\Drivers\Print\GDI\i386 folder, where <extract_path> is the location of the extracted UPD files.
Run the ntprint.inf file.
Click OK.