Lexmark 列印管理運用 Lexmark 文件分送系統 (LDD) 平台。安裝 LPM 之前,請確定已安裝 Lexmark 文件分送系統 (LDD),並且可以透過 Lexmark Management Console-LDD 管控平台 (LMC) 成功登入。
LPM 讓您可列印至中央佇列,然後在您的網路中的任何 Lexmark 多功能複合機釋放工作(為了與解決方案搭配使用而配置)。LPM 提供多種功能,例如卡片驗證、配額實施和使用量追蹤。
LPM 安裝程式可用於將釋放機密列印應用程式安裝到現有的 Lexmark 文件分送系統 (LDD) 執行個體中。安裝程式包含釋放機密列印和行動列印解決方案應用程式。
請注意:
安裝期間,LPM 會偵測 Lexmark 文件分送系統 (LDD) 的版本和安裝類型。如果未偵測到最低 Lexmark 文件分送系統 (LDD) 版本,安裝程式就會顯示錯誤。如需其他關於相容 LPM 和 Lexmark 文件分送系統 (LDD) 版本的資訊,請參閱相容的 LPM 及 Lexmark 文件分送系統 (LDD) 版本。
電子郵件和行動應用程式提出工作時需要文件轉換。安裝期間,LPM 會偵測到已安裝的文件轉換軟體版本。
在執行 LPM 安裝程式之前,請在正在處理文件轉換的每個 Tomcat 或應用程式伺服器上安裝支援的文件轉換應用程式。我們建議您先安裝文件轉換應用程式,再執行 LPM 安裝程式,如此解決方案才能自動使用此應用程式。
Application | 支援的版本 |
---|---|
Microsoft Office |
|
Apache OpenOffice |
|
LibreOffice |
|
如果您使用行動或電子郵件工作提出方法,請在開始前確認已安裝文件轉換軟體。詳情請參閱文件轉換軟體相依性。
從您的電腦,執行 LPM 安裝程式作為管理員。
選取語言,然後按一下確定。
選取安裝。
閱讀並接受授權合約,然後按一下下一步。
選取下列適用元件,然後按一下下一步:
釋放機密列印—包含啟用釋放機密列印的核心檔案與服務
電子郵件—啟用透過電子郵件提出列印工作
行動應用程式—啟用透過 iOS 和 Android 行動裝置提出列印工作
AirPrint—啟用使用 AirPrint 透過 Mac OS X 和 iOS 提出列印工作
選取下列任一進階選項,然後按一下下一步:
更新資料庫—執行 Liquibase 資料庫移轉 script,然後更新資料庫表格和直欄。
安裝釋放機密列印解決方案—安裝 PrintReleasev2 解決方案。
安裝行動解決方案—安裝行動解決方案。
指定資料庫資訊,然後按一下下一步。
請注意:
使用整合式安全性作為鑑別方法時,請確認使用者名稱和密碼具有下列權限:
以服務登入
對於應用程式伺服器上的 Lexmark 文件分送系統 (LDD) 安裝路徑具有完整控制權限
Microsoft SQL Server 釋放機密列印表格的資料庫擁有者 (dbo)
按一下測試連線。
指定搜尋基礎和使用者屬性資訊,然後指定要連接至 LDAP 伺服器的使用者名稱和密碼。
請注意:
按一下安裝 > 完成。
安裝 LPM 之後,視伺服器而定,Lexmark Solutions Application Server 服務可能需要數分鐘的時間啟動。若要檢查 LPM 伺服器是否已就緒,請執行下列動作:
從您的電腦開啟作業管理員。
請確定 Tomcat7 程序的 CPU 效能在超過 15 秒的時間內都少於 3%。
我們建議您在新安裝與升級上執行備份功能。
請注意:
從您的電腦,執行 LPM 安裝程式作為管理員。
請注意:
選取語言,然後按一下確定。
選取僅備份。
請執行下列其中一項:
升級 Lexmark 文件分送系統 (LDD)。如需有關升級 Lexmark 文件分送系統 (LDD) 的其他資訊,請參閱 Lexmark 文件分送系統管理者手冊。
再次執行 LPM 安裝程式,然後選取在安裝期間包含備份 > 安裝。
導覽至內容檔案。
如果您是使用備份從 LPM 2.7 版本或更舊版本升級,或是從 2.5 版本或更舊版本升級,請導覽至 <install-dir>\Lexmark\Solutions\apps\idm\WEB-INF\classes\idm-production-config.properties 檔案,其中 <install-dir> 是 Lexmark 文件分送系統 (LDD) 的安裝資料夾。
如果您要從 LPM 2.5.0 版本或更舊版本升級,請導覽至 <install-dir>\Lexmark\Solutions\apps\MFPAuth\WEB-INF\classes\database.properties 檔案,其中 <install-dir> 是 Lexmark 文件分送系統 (LDD) 的安裝資料夾。
如果您要從 LPM 2.5.0 版本或更舊版本升級至使用 Firebird 資料庫的 LPM 2.5.1 或更新版本,請執行下列動作:
導覽至 <install-dir>\Lexmark\Solutions\apps\printrelease\WEB-INF\classes\database.properties 檔案,其中 <install-dir> 是 Lexmark 文件分送系統 (LDD) 的安裝資料夾。
將
更新為 。如果您要從 LPM 2.3.13 版本或更舊版本升級,或從 2.3.8 版本升級至 2.3.15 版本,再升級至 2.6 版本,請導覽至 <install-dir>\Lexmark\Solutions\apps\printrelease\WEB-INF\classes\database.properties 檔案,其中 <install-dir> 是 Lexmark 文件分送系統 (LDD) 的安裝資料夾。
請執行下列其中一項:
如果您是使用備份從 LPM 2.7 版本或更舊版本升級,請在 idm-production-config.properties 檔案中新增下列項目:
其中:
是對應的輸入號碼。
是用戶端 ID。
是用戶端密碼。
例如
。請注意:
如果您是從 LPM 2.5 版本或更舊版本升級,請在 idm-production-config.properties 檔案中執行下列動作:
將
新增至每個 LDAP 屬性。例如, 和 。新增
LDAP 屬性。如果您是從 LPM 2.5.0 版本或更舊版本升級,請於執行備份之前在 database.properties 檔案的適當表格位置中新增下列項目:
其中
是 或 ,視目前的安裝而定。如果您是從 LPM 2.3.13 版本或更舊版本升級,請於執行備份之前在 database.properties 檔案的適當表格位置中新增下列項目:
其中
是 或 ,視目前的安裝而定。如果您是從 LPM 2.3.8 版本升級到 2.3.15 版本,再升級到 2.6 版本,請在 database.properties 檔案中執行下列動作:
以
取代 。移除
前後的空格。例如,如果目前的行是
,則更新的行必須為 .升級 Lexmark 文件分送系統 (LDD)。如需有關升級 Lexmark 文件分送系統 (LDD) 的其他資訊,請參閱 Lexmark 文件分送系統管理者手冊。
再次執行 LPM 安裝程式,然後選取在安裝期間包含備份 > 安裝。
用於 Firebird 設定
說明
所需值
安裝類型。
Install
安裝 Lexmark 文件分送系統 (LDD) 的資料庫類型。
FIREBIRD
安裝 Lexmark 文件分送系統 (LDD) 的負載平衡器 IP 位址。
安裝 Lexmark 文件分送系統 (LDD) 的內部資料庫 IP 位址。
資料庫的密碼。
資料庫的加密密碼。若此設定不適用,請提供
的值。
設定
說明
所需值
LDAP 伺服器的 IP 位址或主電腦名稱。
使用下列任一格式作為其值:
其中
是 LDAP 伺服器的主電腦名稱或 IP 位址。LDAP 伺服器的連接埠號碼。
LDAP 伺服器的搜尋基礎。
LDAP 伺服器的使用者屬性。
未啟用匿名繫結時,LDAP 伺服器的使用者名稱。
未啟用匿名繫結時,LDAP 伺服器的密碼。
未啟用匿名繫結時,LDAP 伺服器的密碼。
未啟用匿名繫結時,LDAP 伺服器的加密密碼。如果此設定不適用,請提供
的值。LDAP 鑑別方法。
Username
Anonymous
停用 LDAP 憑證驗證。此設定只在使用 LDAPS 時使用。
true(忽略憑證)
false(驗證憑證)
設定
說明
所需值
安裝電子郵件元件。
1(安裝)
0(不安裝)
安裝行動元件。
1(安裝)
0(不安裝)
安裝 AirPrint 元件。
1(安裝)
0(不安裝)
安裝釋放機密列印解決方案。
1(安裝)
0(不安裝)
安裝行動解決方案。
請注意: 請確定 或 設為 1。
1(安裝)
0(不安裝)
執行 Liquibase 移轉。
1(安裝)
0(不安裝)
使用文字編輯器,建立 silent-settings.ini 檔案。
指定正確的配置。
_installOption=Install _lddDatabaseType=FIREBIRD _lddLoadBalancerIp=<IP_address> _lddDatabaseIp=<IP_address> _lddDatabasePassword=<Firebird_Database_Password> _lddDatabasePasswordEncrypted=<Firebird_Database_Password> _LDAPURL=ldap://<IP_address> _LDAPPort=<LDAP_port> _LDAPSearchBase=dc=kinton,dc=com _LDAPUserAttribute=sAMAccountName _LDAPUserName=<username@kinton.com> _LDAPPassword=<Password> _LDAPPasswordConfirm=<Password> _LDAPPasswordEncrypted=<Password> _LDAPAuthMethodState=Username _DBProduct=Internal Database _DBProductName=firebirdsql _DBIp=<IP_address> _DBName=/3050:SOLUTIONINFO _DBUserName=framework _DBPassword=<Firebird_Database_Password> _DBPasswordEncrypted=<Firebird_Database_Password> _DBDriver=org.firebirdsql.jdbc.FBDriver _DBDialect=org.hibernate.dialect.FirebirdDialect _DBValidationQuery=select 1 from RDB$DATABASE _DBQuartzDriverDelegate=org.quartz.impl.jdbcjobstore.StdJDBCDelegate _DBPort=<Port_number> _silentEmailComponent=1 _silentMobileComponent=1 _silentAirprintComponent=0 _silentInstallPRSolution=1 _silentInstallMobileSolution=1 _silentInstallLiquibase=1
_installOption=Install _lddDatabaseType=MSSQL _lddLoadBalancerIp=<IP_address> _lddDatabasePort=<Port number> _lddDatabaseIp=<IP_address> _lddDatabaseUsername=ktest@lrdc.lexmark.ds _lddDatabasePasswordEncrypted=<Password> _lddDBInstanceName= _lddDBIntegratedSecurity=integratedSecurity=true; _LDAPURL=ldap://<IP_address> _LDAPPort=<Port number> _LDAPSearchBase=dc=kinton,dc=com _LDAPUserAttribute=sAMAccountName _LDAPUserName=username@kinton.com _LDAPPassword=<Password> _LDAPPasswordConfirm=<Password> _LDAPPasswordEncrypted=<Password> _LDAPAuthMethodState=Username _DBIp=<IP_address> _DBIntegratedSecurity=integratedSecurity=true; _DBName=;databasename=SOLUTIONINFO; _DBUserName=<Username> _DBPassword=<Password> _DBDriver=com.microsoft.sqlserver.jdbc.SQLServerDriver _DBDialect=org.hibernate.dialect.SQLServer2008Dialect _DBValidationQuery=select 1 _DBQuartzDriverDelegate=org.quartz.impl.jdbcjobstore.MSSQLDelegate _DBForwardSlashes=// _DBProduct=MSSQL _DBProductName=sqlserver _DBPort=<Port_number> _DBInstanceName= _MSDBName=SOLUTIONINFO _MSDBUserName=<Username> _MSDBPassword=<Password> _silentEmailComponent=1 _silentMobileComponent=1 _silentAirprintComponent=0 _silentInstallPRSolution=1 _silentInstallMobileSolution=1 _silentInstallLiquibase=1
_installOption=Install _lddLoadBalancerIp=<IP_address> _lddDatabaseType=FIREBIRD _lddDatabaseIp=<IP_address> _lddDatabasePasswordEncrypted=<Firebird_Database_Password> _LDAPURL=ldap://<IP_address> _LDAPPort=389 _LDAPSearchBase=dc=kinton,dc=com _LDAPUserAttribute=sAMAccountName _LDAPUserName=username@kinton.com _LDAPPassword=<Password> _LDAPPasswordConfirm=<Password> _LDAPPasswordEncrypted=<Password> _LDAPAuthMethodState=Username _DBIp=<IP_address> _DBIntegratedSecurity=integratedSecurity=true; _DBName=;databasename=HYBRID; _DBUserName=<Username> _DBPassword=<Password> _DBDriver=com.microsoft.sqlserver.jdbc.SQLServerDriver _DBDialect=org.hibernate.dialect.SQLServer2008Dialect _DBValidationQuery=select 1 _DBQuartzDriverDelegate=org.quartz.impl.jdbcjobstore.MSSQLDelegate _DBForwardSlashes=// _DBProduct=MSSQL _DBProductName=sqlserver _DBPort=3341 _DBInstanceName=<Instance_name> _MSDBIp=<IP_address> _MSDBName=HYBRID _MSDBUserName=<Username> _MSDBPassword=<Password> _MSDBInstanceName=<Instance_name> _silentEmailComponent=1 _silentMobileComponent=1 _silentAirprintComponent=0 _silentInstallPRSolution=1 _silentInstallMobileSolution=1 _silentInstallLiquibase=1
_installOption=Install _lddLoadBalancerIp=<LB IP Address> _lddDatabasePassword=<Firebird_Database_Password> _lddDatabasePasswordEncrypted=ENC (qJj0mHFqIm6dfigOL/57tw==) _lddDatabaseType=FIREBIRD _LDAPURL=<LDAP IP Address> _LDAPPort=<LDAP Port> _LDAPSearchBase=<LDAP Search Base> _LDAPUserAttribute=<LDAP User Attribute> _LDAPUserName=<LDAP Username> _LDAPPassword=<LDAP Password> _LDAPPasswordConfirm=<LDAP Password> _LDAPPasswordEncrypted=ENC (4dw4psQIC/uas/H7HMcqOQ==) _LDAPAuthMethodState= _DBIp=<DB IP Address> _DBName=/3050:SOLUTIONINFO _DBUserName=framework _DBPassword=<Firebird_Database_Password> _DBPasswordEncrypted=ENC (qJj0mHFqIm6dfigOL/57tw==) _DBProductName=firebirdsql _DBdriver=org.firebirdsql.jdbc.FBDriver _DBDialect=org.hibernate.dialect.FirebirdDialect _DBValidationQuery=select 1 from RDB$DATABASE _DBQuartzDriverDelegate=org.quartz.impl.jdbcjobstore.StdJDBCDelegate _DBForwardSlashes= _DBPRoduct=Internal Database _DBInstanceName= _DBPort=3050 _MSDBName= _MSDBUserName= _MSDBPassword= _silentEmailComponent=1 _silentMobileComponent=1 _silentAirprintComponent=1 _silentInstallPRSolution=1 _silentInstallMobileSolution=1 _silentInstallLiquibase=1
儲存該檔案。
在指令行中,輸入下列指令:
其中:
是 LPM 安裝程式的資料夾路徑。
是 LPM 安裝程式的版本。
是 silent-settings.ini 檔案的資料夾路徑。
安裝程式的備份功能會複印 %allusersprofile%\Lexmark\PrintManagement\backuprestore 資料夾中的 LPM 配置檔案。
下列檔案已儲存:
負載平衡器 | 伺服器 |
---|---|
|
|
下列檔案已儲存,並用於在安裝期間預先填入欄位及回復設定:
負載平衡器 | 伺服器 |
---|---|
|
|
解除安裝 LPM 時,原始的 Apache 配置檔案會回復。若要確定目前的 LPM 配置在安裝期間可以使用,請在系統離線之前執行備份。
以下是 LDAP 資訊的查詢順序:
LDAP 資訊會儲存在 %allusersprofile%\Lexmark\PrintManagement\backupRestore\ldapinfo.txt 檔案中。
如果從來源偵測到 LDAP 資訊,則 LPM 會使用該資訊進行備份,並停止從其他 LDAP 來源搜尋。例如,如果從行動列印解決方案偵測到 LDAP 資訊,就不會繼續搜尋 IDM。
備份功能適用於 Lexmark 文件分送系統 (LDD) 4.8.0 版本,以及 LPM 2.3.11 版本或更新版本。
如果您是從較舊版本的 LPM 升級,在偵測到 Lexmark 文件分送系統 (LDD) 4.8.5 版本或更新版本之前,將無法繼續安裝。詳情請參閱相容的 LPM 及 Lexmark 文件分送系統 (LDD) 版本。
請注意:
使用 Microsoft SQL Server 時,請確定:
執行安裝程式之前,執行個體與資料庫是使用 Microsoft SQL Server Management Console 所建立。
存取釋放機密列印時所用的資料庫帳戶必須具有讀取、寫入和建立表格的權限。
Firebird 是與 Lexmark 文件分送系統 (LDD) 搭售的預設系統資料庫,也可用於 LPM。Microsoft SQL Server 也可以當作 Firebird 的替代方案。若為 Microsoft SQL Server,請在啟動 LPM 安裝程式之前手動建立 LPM 資料庫。在安裝過程中,LPM 會將適當的連接字串填入各種 LPM 資料庫屬性檔案。它也會在指定的資料庫中自動建立 LPM 表格。取決於安裝為非混合式設定或混合式設定,資料來源可能會有所不同。在非混合式設定中,Lexmark 文件分送系統 (LDD) 和 LPM 都使用相同的資料庫。在混合式設定中,Lexmark 文件分送系統 (LDD) 使用 Firebird,而 LPM 使用 Microsoft SQL Server。
LPM 參考以下三個資料庫屬性檔案:
<Install-Dir>\Lexmark\Solutions\apps\printrelease\WEB-INF\classes\database.properties—包含在執行過程中 PrintReleasev2 解決方案參考的資料庫配置。
<Install-Dir>\Lexmark\Solutions\apps\lpm\WEB-INF\classes\database-production-config.properties—包含 LPM 管理入口網站的資料庫配置。
<Install-Dir>\Lexmark\Solutions\apps\idm\WEB-INF\classes\database-production-config.properties—包含 Identity Management Service 的資料庫配置。
例如,LPM 管理入口網站的資料庫配置包含預設和次要資料來源區段。在非混合式設定中,預設和次要資料來源會指向相同的資料庫。在混合式設定中,預設的資料來源會指向 LPM Microsoft SQL Server 資料庫,而次要的資料來源會指向 Lexmark 文件分送系統 (LDD) Firebird 資料庫。
在安裝期間,LPM 會決定備份檔案中的資料庫資訊,並且在欄位中預先填入這些資料。請確認資訊正確。如果備份檔案無法使用,則欄位為空白。
LPM 支援下列項目:
在 Firebird 上安裝 LPM 與 Lexmark 文件分送系統 (LDD) 的工作群組
在 Firebird 上混合式安裝 Lexmark 文件分送系統 (LDD),以及在 Microsoft SQL Server 上安裝 LPM。
在 Microsoft SQL Server 上安裝完整的 Lexmark 文件分送系統 (LDD) 和 LPM
使用 Microsoft SQL Server 時,您可以指定釋放機密列印資料庫的執行個體名稱。如果未指定執行個體名稱和連接埠號碼,則會使用預設執行個體和連接埠號碼。如果您已變更連接埠號碼,請指定該連接埠號碼。最常見的預設連接埠號碼是 1433。
若要使用已命名的執行個體,請在執行個體名稱欄位中輸入名稱。指定連接埠號碼是選擇性的。然而,若有指定,請確定連接埠號碼對指定的執行個體名稱而言是正確的。
使用 Microsoft SQL Server 時,請選取整合式安全性以使用 Windows 鑑別或 Microsoft SQL Server 鑑別。若您選取 Microsoft SQL Server,請提供使用者名稱和密碼。
如果您選擇整合式安全性,則必須以具備資料庫 db_owner 權限的使用者身分執行 LPM 安裝程式。然後您必須在使用者名稱與密碼欄位中輸入認證。
當使用 Microsoft SQL Server 鑑別且 Microsoft SQL Server 只用於 LPM 時,請執行下列動作:
使用文字編輯器,開啟下列檔案:
apps\printrelease\WEB-INF\classes\database.properties
apps\idm\WEB-INF\classes\database-production-config.properties
apps\lpm\WEB-INF\classes\database-production-config.properties
apps\MFPAuth\WEB-INF\classes\database.properties
services\lpm-reports-service\application.properties
使用純文字更新加密的密碼:
從:
dataSource.password = ENC(TO86KjCYKsH7XoInQ1gj/gxj9390+C/g)
變成:
dataSource.password = newpassword
重新啟動 Lexmark Solutions Application Server 服務。
導覽至服務對話框。
找出下列項目:
Lexmark Solutions Application Server
Lexmark Solutions Apache Agent
Lexmark Reports Aggregator Service
右鍵按一下服務,然後按一下登入標籤。
請確定已選取此帳戶,然後輸入您的密碼。
按一下確定。
安裝期間,LPM 安裝程式可讓您輸入 LDAP 資訊,並將資訊寫入適當的位置。密碼會在每個位置加密。LPM 決定備份檔案的 LDAP 資訊,然後在欄位中預先填入資料。請確認資訊正確。如果備份檔案無法使用,則欄位為空白。
輸入必須用來驗證使用者對 LPM 存取的 LDAP 資訊。輸入 LDAP 伺服器的完整 URL。例如,
或 ,其中 是 LDAP 伺服器的 IP 位址。LDAP 連接埠號碼是以個別欄位的方式收集,不可在 URL 欄位中輸入。如需關於 LDAP 和 LDAPS 支援的連接埠號碼的詳細資訊,請參閱LDAP 和 LDAPS 的標準連接埠號碼。您可以使用匿名連線或提供認證來連接至 LDAP 伺服器。
如果使用的是 LDAPS,則不受信任的 SSL 憑證可能會導致測試失敗。嘗試連線之前,請在您的伺服器上安裝 SSL 憑證。您也可以在安裝期間選取忽略 SSL 憑證驗證,將 LPM 安裝程式設定為忽略 LDAP SSL 驗證。
指定 LDAP 配置為釋放機密列印的選擇性功能,但下列項目為必要:
存取 Print Management Console
從行動裝置提出工作
使用 AirPrint 提出工作
在安裝期間,LDAP 設定會寫入內容檔案。請確定解決方案設定是在安裝後進行配置。
在多重網域環境中更新 LDAP 設定時,更新 ldap.properties 檔案的位置是 <install-Dir>\Lexmark\Solutions\apps\printrelease\WEB-INF\classes 資料夾,其中 <install-Dir> 是 Lexmark 文件分送系統 (LPM) 的安裝資料夾。更新後請重新啟動 Lexmark Solutions Application Server 服務。
請注意:
如果 LDAP 憑證為自我簽署,則將憑證新增至 Java 金鑰庫。
從指令提示中,導覽至
。輸入
。其中:
是 Lexmark 文件分送系統 (LDD) 安裝路徑。
是金鑰庫中任何作為憑證別名的不重複數字字串。
是憑證檔案的路徑。
重新啟動 Lexmark Solutions Application Server (LSAS) 服務。
此區段為選擇性,且僅在您的環境有多重網域時才適用。
若解決方案配置中已啟用多重網域支援,請執行下列動作:
使用文字編輯器,開啟 <install-Dir>\Lexmark\Solutions\apps\printrelease\WEB-INF\classes\ldap.properties 檔案,其中 <install-Dir> 是 Lexmark 文件分送系統 (LDD) 的安裝資料夾。
配置下列項目:
# comma-separated list of all fully qualified domain name (all in lower case, no spaces) ldap.domainNames= # determines how we search for direct print user's domain otherwise, use name as is # 0 = don't search; use name as is # 1 = stop search at first match # 2 = search all domains and select only if one match found; ldap.searchUsers=
# ldap settings for each domain; all entries required but can be left blank if not needed/applicable. # Change <domain> to appropriate value, for example, if domain is "somegroup.somecompany.com", then # ldap.somegroup.somecompany.com.server=somevalue ldap.<domain>.server= ldap.<domain>.port= #valid value for the ssl is either 0 or 1 ldap.<domain>.ssl= ldap.<domain>.searchbase= ldap.<domain>.domain= ldap.<domain>.loginuser= ldap.<domain>.loginpw= ldap.<domain>.userattr= ldap.<domain>.mailattr= ldap.<domain>.homedirattr= ldap.<domain>.custom1attr= ldap.<domain>.custom2attr= ldap.<domain>.custom3attr= # LPM-Scan To Network settings domain is always required; should be the short domain name snf.<domain>.domain= # user and pw can be left blank if not using a service account snf.<domain>.user= snf.<domain>.pw= # fileshare can be left blank if not using one of the Fileshare destination options snf.<domain>.fileshare=
儲存該檔案。
重新啟動 Lexmark Solutions Application Server 服務。
使用文字編輯器,開啟 <install-Dir>Lexmark\Solutions\apps\idm\WEB-INF\classes\idm-production-config.properties 檔案,其中 <install-Dir> 是 Lexmark 文件分送系統 (LDD) 的安裝資料夾。
配置下列項目:
# This section SHOULD always be present primary.idm.ldap.url= primary.idm.ldap.base= primary.idm.ldap.userAttribute= primary.idm.ldap.userDn= primary.idm.ldap.password= primary.idm.ldap.domain= primary.idm.ldap.custom1attr= primary.idm.ldap.custom2attr = primary.idm.ldap.custom3attr = # Make sure to add and configure the following entries for each domain in your environment with their appropriate values, where <domain> is the short name for the domain <domain>.idm.ldap.url= <domain>.idm.ldap.base= <domain>.idm.ldap.userAttribute= <domain>.idm.ldap.userDn= <domain>.idm.ldap.password= <domain>.idm.ldap.domain= <domain>.idm.ldap.custom1attr= <domain>.idm.ldap.custom2attr = <domain>.idm.ldap.custom3attr = # These are the common properties idm.token.expirationInMinutes=60 idm.token.maxTokensToPrune=1000 idm.lddLoadBalancer= idm.ldd.baseUri= grails.server.port.http= grails.server.port.https= grails.plugins.springsecurity.portMapper.httpPort= grails.plugins.springsecurity.portMapper.httpsPort= tomcat.keystorePath = tomcat.keystorePassword = idp.client_credentials.1= idp.client_credentials.2=
儲存該檔案。
重新啟動 Lexmark Solutions Application Server 服務。