From Lexmark Management Console, click the Solutions tab.
From the Solutions section, click All Solutions.
Click Install/Upgrade.
Browse to the Hybrid Print Release application.
Click Upload.
From your computer, navigate to the C:\ProgramData\LPMC folder.
Using a text editor, open the configuration.xml file.
If necessary, set to .
From the section, set to the IP address of the LPM server.
If the LPM server is configured with SSL, then do the following:
From the section, set to either or .
From the section, set to either or .
From the section, set to the IP address of the LPM server, and then add .
From the section, set to .
From the Embedded Web Server, navigate to the configuration page for the application.
From the User Authentication section, set Card Validation to Identity Service.
From the Identity Service Settings section, set the identity service provider address to , where is the IP address of the LPM server.
If the LPM server is configured with SSL, then set the badge service provider address to either of the following:
Where is the IP address of the LPM server.
Set Client ID to .
Set Client Secret with the value from <install-Dir>\Lexmark\Solutions\apps\idm\WEB-INF\classes\idm-production-config.properties file, where <install-Dir> is the installation folder of LDD.
Set Card Registration to Identity Service.
Set Manual Login to Identity Service.
Click Save.
From the Embedded Web Server, navigate to the configuration page for the application.
From the Serverless Web Server Settings section, set Server Address to , where is the IP address of the LPM server.
Set the SSL port number to .
Set the HTTP port number to .
Set the security mode to Auto.
Click Save.
Setting | Description |
|---|---|
Card Validation | Determines how cards are validated. Required value
|
Card Registration | The login method for registering using cards. Required value
Note: Selecting Disabled restricts all users from registering their badge at the specific printer. |
Manual Login | The login method for logging in manually. Required value
Note: Selecting Disabled restricts all users from logging in without a badge. |
Setting | Description |
|---|---|
Identity Service Provider Address | The URL of the identity service provider. Use the following format for its value: Where is the IP address of the identity service provider. |
Badge Service Provider Address | The URL of the badge service provider. Use the following format for its value: Where is the IP address of the badge service provider. |
Client ID | The client credentials from the identity service provider used with the client secret. Required value
|
Client Secret | The client credentials from the identity service provider used with the client ID. Set Client Secret with the value from <install-Dir>\Lexmark\Solutions\apps\idm\WEB-INF\classes\idm-production-config.properties file, where <install-Dir> is the installation folder of LDD. To increase security, update the client secret. Make sure that the values match the entries set in the idm-production-config.properties file. |
Setting | Description |
|---|---|
Card Validation | Determines how cards are validated. Required value
|
Card Registration Access Control | Determines the access control that is used for card registration. Required value
Note: Selecting None restricts all users from registering their badge at the specific printer. To configure access controls, do the following:
For more information on configuring access controls, see the Card Authentication Administrator’s Guide. |
Manual Login Access Control | Determines the access control that is used for manual login. The access control configuration for this method is the same as Card Registration Access Control. Required value
Note: Selecting None restricts all users from logging in without a badge. |
Session Access Control | Determines the access control that is used for a user’s session data. Another printer function, such as Copy, may be set to the same access control, and then get the user information. Select the solution or application number that corresponds to the BadgeAuth or CardAuth security template that is defined when creating an access control. Required value
|
Setting | Description |
|---|---|
Identity Service Provider Address | The URL of the identity service provider. Use the following format for its value: Where is the IP address of the identity service provider. |
Badge Service Provider Address | The URL of the badge service provider. Use the following format for its value: Where is the IP address of the badge service provider. |
Client ID | The client credentials from the identity service provider used with the client secret. Required value
|
Client Secret | The client credentials from the identity service provider used with the client ID. Set Client Secret with the value from <install-Dir>\Lexmark\Solutions\apps\idm\WEB-INF\classes\idm-production-config.properties file, where <install-Dir> is the installation folder of LDD. To increase security, update the client secret. Make sure that the values match the entries set in the idm-production-config.properties file. |
Setting | Description |
|---|---|
Web Server | Lets the application communicate with Lexmark Print Management Client via Lexmark Print Management as an Active Directory. Required value
|
Server Address | The URL of the web server. Use the following format for its value: Where is the IP address of the web server. |
Security Mode | Handles the used HTTP connections. Required value
|
SSL Port | The SSL port number used by the server. Required value
|
HTTP Port | The HTTP port number used by the server. Required value
|
Setting | Description |
|---|---|
Serverless (Web) | Lets the application communicate with Lexmark Print Management Client via Lexmark Print Management as an Active Directory. Required value
|
Server Address | The URL of the web server. Use the following format for its value: Where is the IP address of the web server. |
SSL Port | The SSL port number used by the server. Required value
|
HTTP Port | The HTTP port number used by the server. Required value
|
Security Mode | Handles the used HTTP connections. Required value
|
From Lexmark Management Console, click the Device Groups tab.
From the Device Groups section, select Serverless Print Release.
From the Tasks section, select Home Screen.
Click the tab for each device class that you want to customize.
Select Use this home screen as part of the device groups policy.
In the Action menu, select App Reservation.
In the Profile menu, select either of the following:
For e-Task 5 printers, select printRelease.
For e-Task 4 and e-Task 3 printers, select LPRP4.
Click Apply.