Adding a print release queue on Mac computers

Note:  Contact your system administrator for the preferred method.
  1. From your Mac computer, open the System Preferences window, and then click Print & Scan .

    Note:  You may need administrative rights to unlock the pane. For more information, contact your administrator.
  2. Click add , and then do one of the following:

    Use Line Printer Daemon

    This method shares a printer on the server, and then the client Macintosh prints to it using the Line Printer Daemon (LPD) protocol.

    1. Click IP , and then enter the server IP address.

    2. In the Protocol menu, select Line Printer Daemon – LPD .

    3. In the Queue field, enter the printer share name.

    4. In the Use menu, select Select Printer Software , and then select a print driver.

    Use Samba share

    This method shares a printer on the server, and then the client Mac computer connects to the shared printer as a Samba share.

    1. Press the control key, right-click the window toolbar, and then click Customize Toolbar .

    2. Drag Settings to the toolbar, and then click Done .

    3. Click Settings > Type > Windows Printer via spools .

    4. Enter the smb:// URL with an IP address or server name and the printer share name. For example, smb://10.1.2.3/PrintReleaseShareName .

    5. In the Use menu, select Select Printer Software , and then select a print driver.

    Use AirPrint

    Note:  To use this feature, make sure that AirPrint is enabled on the Print Management server. For more information, contact your administrator.

    Select a printer with the AirPrint software feature.

  3. In the Filter field, do either of the following:

  4. Click Add > OK .