LEXMARK SCAN TO RIGHTFAX
Readme for version 1.2.1 and 1.3.0


1.  OVERVIEW

    This Readme file pertains to the current release of the LEXMARK SCAN TO
    RIGHTFAX application.

    Lexmark Scan to RightFax is an embedded solution that can be installed on
    multifunction printers that support the Lexmark Embedded Solutions Framework
    (eSF) v2.x, v3.x, or v4.x. This application lets you scan documents at a
    printer and send them directly to a RightFax server. RightFax is a network
    fax application that runs on Windows servers and enables users to receive
    faxes at their computers.


2.  ASSOCIATED FILES

    The following files and publications are included in the release.

    a.  Application Files

        *  rightFax_e2-1.2.1.fls
           *  The Scan to RightFax application for eSF v2.x printers

        *   rightFax_e3-4_s2-1.3.0.fls
           *  The Scan to RightFax application for eSF v3.x printers and v4.x
              printers with 7-inch control panels

        *  rightFax_e3-4_s3-1.3.0.fls
           *  The Scan to RightFax application for eSF v4.x printers with 4.3-
              inch control panels


    b.  Publications

        *  ScantoRightFax_AdminGuide.pdf
           *  The Administrator's Guide

        *  Readme.txt
           *  (this file)


3.  REQUIREMENTS

    a.  A printer that supports eSF v2.x, v3.x or v4.x applications.

        Supported eSF v2.x printers include:

          *  X65x
             *  Required firmware level:  LR.MN.P626 or later.

          *  X73x
             *  Required firmware level:  LR.FL.P626 or later.

          *  X46x
             *  Required firmware level:  LR.BS.P626 or later.

          *  X86x
             *  Required firmware level:  LP.SP.P626 or later.


        Supported eSF v3.x printers include:

          *  X54x
             *  Required firmware level:  LHS2.VK.P244a or later.

          *  X74x
             *  Required firmware level:  LHSC.NY.P260e or later.

          *  X792x
             *  Required firmware level:  LHS2.MR.P244a or later.

          *  X925x
             *  Required firmware level:  LHS2.HK.P244b or later.

          *  X95x
             *  Required firmware level:  LHS2.TQ.P244a or later.

          *  6500e
             *  Required firmware level:  LHS2.JR.P244b or later.


        Supported eSF v4.x printers include:

          *  CX410
             *  Required firmware level:  LW20.GM4.P231 or later.

          *  CX510
             *  Required firmware level:  LW20.GM7.P231 or later.

          *  MX51x, MX410
             *  Required firmware level:  LW20.SB4.P231 or later.

          *  MX61x
             *  Required firmware level:  LW20.SB7.P231 or later.

          *  MX71x
             *  Required firmware level:  LW20.TU.P231 or later.

          *  MX81x
             *  Required firmware level:  LW20.TU.P231 or later.

          *  MX6500e
             *  Required firmware level:  LW20.JD.P035a or later.

          *  MX91x
             *  Required firmware level:  LF.MG.P039  or later.


    b.  Memory:  The printer must have a minimum of 256MB RAM.


    c.  License:  This application requires an electronic license. To obtain a
                  license, visit www.lexmark.com and click the "Contact Lexmark"
                  link at the bottom of the screen.
                  
    d.  Minimum RightFax Server Version : 10.6


4.  LIMITATIONS AND COMPATIBILITY OF THE RELEASE

    a.  For eSF v2.x printers, image files exceeding 3MB cannot be sent to the
        RightFax server; for eSF v3.x and v4.x printers, image files exceeding
        10MB cannot be sent.


5.  RELEASE NOTES

    *  10.6 RightFax Server support
    *  Windows NT Authentication Support




    For further installation and configuration instructions, please see the
    Lexmark Scan to RightFax Administrator's Guide provided with the
    application. Adobe Acrobat Reader is required to view this guide.