Configuring applications using the Embedded Web Server (EWS)

Accessing application configuration settings using the Embedded Web Server

  1. Obtain the printer IP address:

    • From the printer home screen

    • From the TCP/IP section in the Network/Ports menu

    • By printing a network setup page or menu settings page, and then finding the TCP/IP section

    • Note: An IP address appears as four sets of numbers separated by periods, such as 123.123.123.123.
  2. Open a Web browser, and then type the printer IP address in the address field.

    The Embedded Web Server appears.

  3. From the navigation menu on the left, click Settings or Configuration, and then do one of the following:

    • Click Apps > Apps Management.

    • Click Device Solutions > Solutions (eSF).

    • Click Embedded Solutions.

  4. From the list of installed applications, click the application you want to configure, and then click Configure.

Customizing the display icon

  1. Access the application configuration settings from the Embedded Web Server or MarkVision Professional.

  2. From the Configure, Profile, or Profiles page, add or edit a profile, and then change the settings if necessary:

    • Button Text or Icon Text—Type up to 20 characters that will appear above the profile button on the printer home screen. This field is required.

    • Button Icon or Icon—Browse to a new image file that represents the profile on the printer home screen. This field is optional.

    • Button Icon when pressed or Icon when pressed—Browse to a new image file that will be displayed while the profile icon is being pressed. This field is optional.

      Notes:

      • For printers running the Embedded Solutions Framework (eSF) version 3.0 or later, the image should be a PNG file with a transparent background, and should measure 192 x 302 pixels. It should not exceed 11KB in size.
      • For printers running eSF version 2.0, the image should be a GIF, PNG, or JPEG file, and should measure 120 x 75 pixels.
      • For printers running eSF version 1.2, the image should be a GIF file and should measure 120 x 75 pixels.
      • If you are unsure about which version of eSF your printer is running, then see Checking which version of the Embedded Solutions Framework is installed on a printer.
  3. Save or discard your changes.

Checking which version of the Embedded Solutions Framework is installed on a printer

  1. Obtain the printer IP address:

    • From the printer home screen

    • From the TCP/IP section in the Network/Ports menu

    • By printing a network setup page or menu settings page, and then finding the TCP/IP section

    Note: An IP address appears as four sets of numbers separated by periods, such as 123.123.123.123.
  2. Open a Web browser, and then type the printer IP address in the address field.

  3. From the Embedded Web Server, click Reports  > Device Settings.

  4. Scroll down until you see “Embedded Solutions” (usually found near the bottom).

  5. In the Embedded Solutions section, note the value next to “Framework =”. This signifies the installed version.

Note: To view the complete list of supported printers for each version of the Embedded Web Server, see the Readme file.