Application error

Try one or more of the following:

Check the diagnostic log

1. Open a web browser, and then type IP/se, where IP is the printer IP address.

2. Click Embedded Solutions, and then do the following:

   1. Clear the log file.

   2. Set the logging level to Yes.

   3. Generate the log file.

3. Analyze the log, and then resolve the problem.

   Note: To avoid insufficient memory problems, after analyzing the log, set the logging level to No.

Limit the number of profiles that you create

You may encounter problems if there are too many profiles. If the printer memory is 2GB, then we recommend creating only up to 80 profiles.

Adjust the scan settings

1. From the Embedded Web Server, navigate to the configuration page for the application.

2. Add or edit a profile.

3. From the Scan Settings section, select a lower scan resolution or turn off color scanning.

4. Click Apply.

Contact your Lexmark representative