Deployed solutions do not appear on the printer

Try one or more of the following:

Configure the Solution Composer Agent

If the Solution Composer Agent was already deployed, then restart the solution.

1. Obtain the printer IP address. Do either of the following:

   • Locate the IP address on the top or upper-left corner of the printer home screen.

   • View the IP address in the Network Overview section or in the TCP/IP section of the Network/Ports menu.

2. Open a web browser, and then type the printer IP address.

3. Depending on your printer model, do one of the following:

   • Click Apps > Solution Composer Agent > Stop > Start.

   • Click Settings > Apps > Apps Management > Disable > Enable.

   • Click Settings > Device Solutions > Solutions (eSF).

     Select the Solution Composer Agent check box, and then click Stop > Start.

   • Click Settings or Configuration, and then click Embedded Solutions.

     Select the Solution Composer Agent check box, and then click Stop > Start.

Redeploy the solution

For more information, see Step 5: Deploying solutions.

Install the solution from the printer Embedded Web Server

If the solution cannot be deployed directly to the printer, then try deploying it to a file. Use the Solution Composer Agent application to install the file on the printer Embedded Web Server.

Depending on your printer model, Solution Composer Agent can be deployed from Lexmark Virtual Solution Center. For more information, contact your solution provider.

To access the Solution Composer Agent solution management page from the Embedded Web Server, click Applications > Solution Composer.