Back to Main Page

Configure a network printer

You can set the IP address of a printer attached to a network either through a built-in factory installed network interface (available on some specific printers), or through an optional external network adapter.

Note: If the printer has been previously configured, it can be used without being reconfigured provided no one else is currently using that same IP address.

Configure a network printer from the Printer Selection dialog

  1. Open the Lexmark 6200 Series Utility.
  2. From the menu bar, choose Advanced. The Advanced menu appears.
  3. Choose Select Printer. The Printer Selection dialog appears.
  4. Select your printer from the list, and then click Configure. The Configure Network Printer dialog appears.
    1. Assign an IP address to your network printer. Contact your network administrator for more information.
    2. Click OK to go back to the Printer Selection dialog.
  5. Select your All-In-One from the list on the Printer Selection dialog.
  6. Click Select.

Configure a network printer from the Configure Network Printer dialog

  1. Open the Lexmark 6200 Series Utility.
  2. From the menu bar, choose Advanced. The Advanced menu appears.
  3. Choose Network Printer Configuration. The Network Printer Configuration dialog appears.
  4. Select your printer from the list, and then click Configure. The Configure Network Printer dialog appears.
    1. Assign an IP address to your network printer. Contact your network administrator for more information.
    2. Click OK to go back to the Printer Selection dialog.
  5. Select a printer from the list on the Printer Selection dialog if you want to configure another printer. Otherwise, click Done.
Back to Networking