Printing photos from a digital camera using DPOF

Digital Print Order Format (DPOF) is a feature available on some digital cameras. If your camera supports DPOF, you can specify which photos to print, how many of each, and print settings while the memory card is still in the camera. The printer recognizes these settings when you insert the memory card into the printer.

Note: If you specified a photo size while the memory card was still in the camera, make sure the size of the paper loaded in the printer is not smaller than the size you specified in the DPOF selection.

  1. Load photo paper in Tray 1 or in the small media feeder.

    Note: Load the photo paper with the glossy or printable side facing down. (If you are not sure which side is the printable side, see the instructions that came with the paper.)

  2. Insert a memory card.

  3. From the control panel, press select button.

  4. Press up button or down button repeatedly until Print Camera Selections is highlighted.

  5. Press Select button.

  6. Press Select button again.

  7. Press the left arrow button or the right arrow button to preview the photos.

  8. Press start button to print.

    Note: To prevent smudging or scratching, avoid touching the printed surface with your fingers or sharp objects. For best results, remove each printed sheet individually from the paper exit tray, and allow the prints to dry at least 24 hours before stacking, displaying, or storing.